Installing the Bracket
Installing MTBR-07S(BT77) Bracket for Infrared Receiver RC-07 and Achiever Receiver/Amplifier
Please carefully read the following assembly, installation and safety instructions before installation of MTBR-07S Bracket for Infrared Receiver RC-07 and Achiever Receiver/Amplifier.
1.Installation Surface – The enclosed accessories are suitable only for attaching to walls made of solid concrete or wood studs. Do not install to sheet rock or wood panel.
2.Tighten all the nuts using appropriate wrench.
3.Make sure that MTBR-07S Bracket is installed so the tray is above average head height and doesn’t disturb free movement in hallways.
4.You must test the MTBR-07SBracket before setting Infrared Receiver RC-07 orAchiever Receiver/Amplifier.
5.The maximum weight allowed on the mount is 55 lbs.
6.Check that the Infrared Receiver RC-07 or Achiever Receiver/Amplifier is securely fastened to the bracket so it will not fall forward.
7.One month after installation and every six months after that, check that MTBR-07S Bracket is securely fastened to the wall and the screws and nuts are not loosening. In case of weakening, remove Infrared Receiver RC-07 or Achiever Receiver/Amplifier, and strengthen all the points that have weakened.
8.Before reinstalling MTBR-07SBracket, remove the Infrared Receiver RC-07 or Achiever Receiver/Amplifier, first and then remount according to this manual instructions.
