Installation
■Connections
◎Remove the AC power cord from the power outlet when connecting the system.
◎Use the specified AC adapter.
●Basic Connections for the "Achiever"
◎This connection diagram is an example of using 1 or 2 infrared wireless
microphones with the "Achiever" infrared wireless receiver/amplifier. With this configuration set the "frequency selector switch" on the sensor to 1/2: 1ch/2ch.
1/2: 1ch/2ch setting
Coaxial
cable
・・・ Pin plug
・・・
DVD recorder etc.
Achiever
Bundle the cables with tie wraps and fasten them to the "mount for the cable clamp".
AC 120V 50/60 HZ
Specified AC adapter
34