Dukane CAE-20W instruction manual Installing the Bracket

Models: CAE-20W

1 63
Download 63 pages 52.96 Kb
Page 50
Image 50
Installing the Bracket

Installing the Bracket

Installing MTBR-07L(STC-98014) for the Ultimate II and Innovator Receiver Amplifier Please carefully read the following assembly, installation and safety instructions before installation of MTBR-07L Bracket for Ultimate II and Innovator Receiver Amplifier.

1.Installation Surface – The enclosed accessories are suitable only for attaching to walls made of solid concrete or wood studs. Do not install to sheet rock or wood panel.

2.Tighten all the nuts using the wrench supplied with the mount. The nub must be tightened until the threading of the screw passes the plastic part of the nut.

3.Make sure that MTBR-07L Bracket is installed so the tray is above average head height and doesn’t disturb free movement in hallways.

4.You must test the MTBR-07LBracket before setting Ultimate II or Innovator Receiver Amplifier.

5.Calculate the maximum weight allowed on the mount by multiplying the specified weight (this weight will be specified in the packaging of the bracket) by 1.75. (I.e. weight x 1.75).

6.Check that Ultimate II or Innovator Receiver Amplifier is securely fastened to the bracket so it will not fall forward.

7.One month after installation and every six months after that, check that MTBR-07L Bracket is securely fastened to the wall and the screws and nuts are not loosening. In case of weakening, remove Ultimate II or Innovator Receiver Amplifier, and strengthen all the points that have weakened.

8.Before reinstalling MTBR-07L Bracket, remove Ultimate II or Innovator Receiver Amplifier first and then remount according to this manual instructions.

50

Page 50
Image 50
Dukane CAE-20W instruction manual Installing the Bracket