POWER AMPLIFIER DPA 4120 / DPA 4140 | OWNER'S MANUAL |
DPA 4140
400 WATTS POWER AMPLIFIER
CLIPTEST
0dB
READYSTANDBY
GROUND | PROTECT | |
FAULT | ||
|
Performance Features
Power amplifier with 200 W or 400 W output power according to the IEC
xsupported are 115/230V AC mains as well as 24V DC emergency power source
xpower amplifiers DPA 4120 providing 200 W or DPA 4140 providing 400 W output power, idling and
xoutput transformer for balanced, floating 100 V speaker networks of optionally 70 V, 50 V or 4 ohms for
xoptional input modules:
standard operation INPUT MODULE with level control, electronically balanced input and MONITOR output with optional transformer or
REMOTE MODULE for controlling and monitoring the PROMATRIX system, electronic level controls, electronically balanced input and MONITOR output with optional transformer
xintegrated
xmains POWER ON/OFF switch
xground lift switch
xremotely controllable mains and battery operation with initial current inrush limiter
x
x
xfault message according to the IEC 849 standard
xTEST button to switch between system and average operation, respectively a RESET button to restart after the occurrence of ground fault conditions
xLED level meter instrument with a display range of
xintegrated relays for single call and obligatory reception
xactive, temperature controlled ventilation
xpilot tone and ground fault surveillance module according to the DIN/VDE 0800 standard (optional)
The
23