Dynacord DRM 4000 owner manual Online-Access to all Parameters, REMOTE/PRIO value

S PECI F I C A T IO N S

10.4.2 Online-Access to all Parameters

Via RS-232 connection and using REMOTE-commands provides direct access to all DRM 4000 parame- ters, like routing, VCA, priority override, ducking, mute, etc. Controlling the unit is possible parallel to any other control method (hardware contact switching, software contact switching, external VCA-control), with any individual priority being recognized. For example, activating an external contact with a higher priority setting overrides actual remote settings. As soon as deactivating the contact again, all previous remote are regained.

Generally, all REMOTE-commands have the lowest priority (0) and all entries are set to NO_CHANGE. The following table lists all REMOTE-commands and their corresponding parameter values.

Please be aware of the fact that all REMOTE-commands are transient and are set back to their default values (NO_CHANGE, priority 0) upon switching the unit’s power on or after resetting the device.

ASCII-command		Comment
/SERVICE/HB value	Value: 60 ... 0, OFF / ?	(see above)
/SERVICE/CC/ON value	Value: NONE, 1-8 / ?	(see above)
/SERVICE/CC/OFF value	Value: NONE, 1-8 / ?	(see above)
/REMOTE/PRIO value
	Value: 0 ... 255 / ? ( 0 = lowest, 255 = highest priority)
e. g.:	Write access: assigns a priority to REMOTE-commands.
/REMOTE/PRIO 100	Read access: reads a REMOTE-command’s actual priority.
/REMOTE/PRIO ?
/EDIT/REMOTE/MIC_LINE1/ROUTING value	Value: NO_CHANGE, OFF, MONO_A, MONO_B, DUAL / ?
	Write access: sets the routing of MIC/LINE 1 via remote (mind
e. g.:	priorities!)
/EDIT/REMOTE/MIC_LINE1/ROUTING MONO_A	Read access: reads the routing of MIC/LINE 1, which has been set via
/EDIT/REMOTE/MIC_LINE1/ROUTING ?	remote.
/EDIT/REMOTE/MIC_LINE1/OVERRIDE value	Value: ON, OFF / ?
e. g.:	Write access: activates or deactivates priority override of MIC/LINE 1
	via remote (mind priorities!)
/EDIT/REMOTE/MIC_LINE1/OVERRIDE ON
	Read access: returns the actual status.
/EDIT/REMOTE/MIC_LINE1/ OVERRIDE ?
...	ROUTING for MIC_LINE2 … MIC_LINE4 see MIC_LINE1
	OVERRIDE for MIC_LINE2 see MIC_LINE1
/EDIT/REMOTE/MIC_LINE4/...	...
/EDIT/REMOTE/AUX1 value	Value: NO_CHANGE, OFF, MONO_A, MONO_B, DUAL, STEREO / ?
e. g.:	Write access: sets the routing of AUX 1 via remote (mind priorities!)
	Read access: reads the routing of AUX 1, which has been set via
/EDIT/REMOTE/AUX1 STEREO
	remote.
/EDIT/REMOTE/AUX1 ?
...	…
/EDIT/REMOTE/AUX4 value	ROUTING for AUX2 … AUX4 see AUX1
/EDIT/REMOTE/OUT_A/MUTE value	Value: NO_CHANGE, ON, OFF / ?
e. g.:	Write access: sets the status output relay in the MASTER A output via
	remote (mind priorities!)
/EDIT/REMOTE/OUT_A/MUTE OFF
	Read access: reads the actual status.
/EDIT/REMOTE/OUT_A/MUTE ?
/EDIT/REMOTE/OUT_A/DUCK value	Value: NO_CHANGE, ON, OFF / ?
e. g.:	Write access: sets the status of the ducking control in the MASTER A
	output via remote (mind priorities!)
/EDIT/REMOTE/OUT_A/DUCK ON
	Read access: reads the actual status.
/EDIT/REMOTE/OUT_A/DUCK ?
/EDIT/REMOTE/OUT_A/LEVEL value	Value: NO_CHANGE, -90 ... 0 / ?
e. g.:	Write access: sets the VCA of the MASTER A output via remote to
	the desired value (mind priorities!)
/EDIT/REMOTE/OUT_A/LEVEL -10
	Read access: reads the actual status.
/EDIT/REMOTE/OUT_A/LEVEL ?
...	...
/EDIT/REMOTE/OUT_B/...	OUT_B settings see OUT_A
/EDIT/ACTUAL/...	Reads the actual states of the DRM 4000 like routing etc.
e.g..: /EDIT/ACTUAL/MIC_LINE1/ROUTING?	Only read access is recommended.

10-6