Chapter 4: Web Configuration
Internet – ADSL
Enable ADSL Port:
Check this box to enable this function.
It simply invokes the line mode that
you choose here for the router.
Select the support of line modes:
There are several selections, and you
may select them according to the line
modes supported by your ISP and
your needs.
Capability Enabled:
Two items are provided here for you
choose.
Bitswap:
to
the modem during
ons. It
ower
ATU. After a bit
swapping reconfiguration, the total
data rate and the data rate on each
latency path is unchanged. Check this
box to enable the function. If not,
uncheck this box to close the function.
Seamless Rate Adaptation:
It enables the ADSL2/
It is a mandatory receiver initiated
feature to maintain the operating
conditions of
changing environm ent conditi
reallocates the data bits and p
among the allowed ca rriers without
modification of the higher layer control
parameters in the
A
DSL2+ Router
to change the data rate of the
connection while in operation without
any service interruption or bit errors.
Check this box to enable the function.
If not, uncheck this box to close the
function.