Chapter 4: Web Configuration
WAN 802.1p:
If 802.1p is enabled on Internet
connection, WAN 802.1p value of the
upstream packets can be overwritten
by the selected value. You may se
a priority from the drop-down menu.
lect
If you set the LAN 802.1p Priority 0
as the traffic condition, choose Low
traffic priority for this rule, set DSCP
as BE, and
WAN 802.1p as no
pply, you will
rs’ data matches
and
change, after clicking A
get the result as the figure in the right
column.
Thus when the use
the traffic co ndition, the transmission
will get a low traf fic priority.
You may check the Delete box
press Delete to discard it, or click Add
to create more.
Quality of Serv
To classify the upstream traffic by
assigning the transmission priority o
the data for different users, please use
IP QoS to prioritize the data
transmission.
ice – IP QoS
f
The IP QoS allows you to set the
settings based on layer three IP
packets.
To add a new IP QoS settin
Add in the page of Quality of
Service – IP QoS, a page same as
the right side will appear.
Traffic Class Name:
Type a name as the traffic class for
identification.
LAN Ports which traffic c om e from :
The IP QoS rules will be applied on
the LAN ports you che cked here. The
default setting includes all ports.
Source MAC Address& MAC M
Destination MAC Address& MAC
Mask:
Key in the sp
g, press
ask/
ecific MAC Address or
MAC Mask of the devices whi ch you
want the QoS rule to be applied to, or
simply leave it blank to include all.
Protocol:
Choose a proper interface for this
function. If you don’t know how to
select, simply use the default one.