Chapter 2: System Requirement and Installation
When connecting through a hub, please refer to the following diagram for illustration.
USB Driver Installation
If the ADSL router is connected to a PC through the USB interface, you will be
prompted for the USB drivers when plugging the USB cable to the PC. Refer to the
relevant operating system to install the USB drivers.
For Windows ME
n Run the USB install ation program from the CD provided in your router
package.
o An Inst allShield Wizard will appear. Please wait for a moment.
p When the welcome screen appears, click Next for the next step.
q When the complete windo w of the InstallShield Wizard appears, click
Finish.
r Link your router and the PC with a USB cable.
s The system will detect the USB driver automatically. Then, the system will
copy the proper files for this router.
Note: If the USB device is not detected automatically, check the USB cable
between the PC and the device. Beside s, verify that the device is power on.
t When the file copying finished, the dialog above will close. Now the USB
driver is inst alled properly. You can use the router.
For Windows 2000
n Run the USB install ation program from the CD provided in your router
package.
5