Chapter 4: Web Configuration
IP over ATM
If the type you have to choose is IP
information. over ATM, please refer to the following
to
uses ATM
uality of service’s feature s.
hoose IPoA and click Next.
IPoA is an alternative of LAN
emulation. It allows TCP/IP network
access ATM network and
q
C
None:
If it is not necessary to set the WAN IP
address, please click this button.
Obtain an IP address automatically
Click this button to allow the s :
ystem to
get an IP add ress automatically.
WAN IP Address & WAN Subnet
Mask:
If you choose Use the following IP
address, you have to enter the IP
address and subnet mask information
that you received from the ISP for the
WAN interface.
Obt ain DNS server address
automatically:
Only when you select Obta in an IP
address automatically that this
option is available. You may click this
button to allow the system to get DNS
server address automaticall y.
Use the following DNS server
addresses:
Select this item to set the DNS server
addresses manually, type the
information provided by your ISP in
the following Primary DNS and
Secondary DNS server entries, e.g.,
168.95.1.1 and 168.95.192.1.
Click Enable NAT if necessary.
After setting up the WAN IP and
DNS server information, click Next
to open the following pa ge.
On the Configure LAN side Setting s
page, you have to fill in the data
requested.
Primary IP Address & Subnet Mask:
Key in the information that of fered by
your ISP for the LAN connection, e.g.,
192.168.1.1 for the primary IP address
and 255.255.255.0 for the subnet
mask.
MTU:
(Please refer to the PPPoA/ PPPoE
section.) The default MTU setting here
is 1500. You may modify it if
necessary.