ADSL Router User Manual
Problems with Upgrading
The following lists the e rror messages that you may see during upgrading and the
action to take.
Error message: All the ADSL LEDs light up and cannot light off as usual.
is lost for some unknown rea son s,
the normal web page for the router might be damaged. After powe r on your
router, the LEDs might not work normally.
Possible cause: When users are executing firmwa re upgrade or saving
settings to the router, the power for the router
Action: Setup you PC with a st
access the router’s web p a ge atic IP address, su ch as 192.168.1.2, and then
by entering http://192.168.1.1. Then update the
correct; otherwi se download a
of memory.
ssage: Image uploading failed. No image file was selected.
ossible cause: You did not select a file correctly.
the web.
firmware again.
Error Message: Image uploading failed. The selected file contains an illegal
image.
Possible cause: The firmware file format is invalid.
Action: Check to see whether the file format is
firmware file with correct format.
Error Message: Image uploading failed. The system is out of memory.
Possible cause: It may be caused by the lack
Action: Reboot your ADSL Router and perform the upgrade task again.
Error Me
P
Action: Download a com patible firmware from
122