Chapter 2: System Requirement and Installation
Chapter 2: System Requirement and Installation
System Requirement
To access the ADSL Router via Ethernet, the host computer must meet the following
requirements:
Equipped with an Ethernet network inte rface.
Have TCP/IP installed.
Allow the client PC to obtain an IP addre ss automatically or set
uter, or the host PC
TTP
web browser to allow you to set up and manage the device.
a fixed IP addre ss.
With a web browser installed: Internet Explorer 5.x or later.
The ADSL Router is configured with the default IP address of 192.168.1.1 and
subnet mask of 255.255.255.0. Considering that the DHCP server is Enable by
default, the DHCP clients should be able to access the ADSL Ro
should be assigned an IP address first for initial configuration.
You also can manage the ADSL Router through a web browser-based manager:
ADSL ROUTER CONTROL PANEL. The ADSL Router manager uses the H
protocol via a
rectly or through an external hub/switch to the LAN port of
the device).
To configure the device via web browser, at least one
properly-configured PC must be connected to the network (either
connected di
Choosing a place for the ADSL Router
n ose to ADSL wall outlet and power outlet for the
o ay walk on the cables. Also
rces.
p Place the device on a flat and st able stand.
Place the ADSL Router cl
cable to reach it easily.
Avoid placing the device in places where people m
keep it away from direct sunlight or h eat sou
3