Chapter 4: Web Configuration
This page pro v ides some settings for
you to adjust for adding a new
outbound IP Filtering.
Allow Traffic:
Choose No to stop the data
transmission, Yes to permit the data
pass through.
Protocol:
Here provides several default policies
for security levels for you to choose. If
you don’t want to use the predefined
User Defined
setting, you have to enter a port
number in the “as” field.
setting, you can use User Defined to
set a customized protocol according to
the necessity.
When you choose
Source/Destination IP address :
To specify IP addre ss to allow or deny
data transmi s sion, please pull down
the drop-down menu to choose a
proper one.
The setting All means that all the IP
addressed in the network are allowed
or denied to pass thro ugh in Internet.
net, you
y.
If you choose Single or Sub
will have to key in the specific IP
address (and Netmask for subnet) as
the start/end point to let the router
identify for granting or denying
passi ng through.
Port Range:
The port range is from 0 to 65535.
Please key in the start poi nt and end
point for the IP Filtering.
After finish the settings, click Appl
e Source
o
535 as
Here provides an example shown in
the right column. Select TCP as the
Protocol type, and make th
and Destination IP address t
include All, then type 0 and 65
the start and end port.
99