ADSL Router User Manual
Select traffic dir
down menu, anection from the drop
d check the network
interface which you want this rule to
apply on. Then, choo se a protocol and
define the source or destination MAC
address whi c h you want to control.
There h
directio means from local
are t ree options for traffic
n: Outbound
network to Internet; Inbound means
from Internet to local network;
Bi-direction includes both directions.
The protocols that you can choose is
listed as the right figure shows.
one proper protocol for this brid Select
ge
filtering rule.
For example, if we choose Outbound,
check br_0_35, select PPPoE as
protocol, and enter 00:90:96:01:2A:C3
into the Source MAC Address field,
then after clicking Apply, we will see
the result as shown in the right.
You can use Add or Delete button to
maintain the bridge filtering rules.
Firewall – IP Filtering
This page all ows you to specify the IP
packet filtering rule s to prevent the
services accessed from the Internet
r
hosts or limit the Internet access fo
local hosts.
Choose Disabled to disable the
firewall function. Click Enabled to
invoke the settings that you set in this
web page.
To initiate the IP Filtering, please
select the Enabled radio b utton and
click Apply. The web page will be
shown as the right picture.
Select the direction to filter
packets:
Inbound means the data is transferred
Internet. Please
direction for filtering
from outside onto your computer.
Outbound means the data is
transferred from your computer onto
outside through
choose Outbound traffic or Inbound
traffic as the
packets.
Then, to add a new IP Filtering rule,
click Add.