Chapter 4: Web Configuration
Quick Start
The pages un der the Quick Start menu provide user a quick way to set up the router.
If you do not know much about the router, you can use the Quick Start p ages to
adjust basic settings
Connect to Internet
This is a quick way to connect to the
Internet by using PPPoE interface,
please click Conn
open the web page.
Enter the user name a
(that you get from the ISP) for your
ADSL router and cli
The sy
and then you can ac
to activate your router.
ect to Internet to
nd password
ck Connect.
stem will connect automatically,
cess the Internet.
Quick Setup
The quick setup wizard will guide you
to configure the ADSL router through
pecific steps
tion interface
g pag
following pages for de
Auto Scan Internet Connection
The default setting is checked, shown
as the figure. If there is no any PVC
configured in your ADSL router, you
some s
connec . Yet different
will lead to
different settin es. Refer to the
tailed
information.
(PVC):
can check this item so that it may start
to scan internet connection
automatically. Otherwise, please leave
this item unchecked.
you will have to enter VPI and VCI
w ATM PVC.
valid range is from 0 to 255. To enter
the setting, please refe
that the ISP offered.
CI (Virtual Channel Identifier):
virtual channel endpoints
an ATM network. The valid range is
from 32 to 65535 (1 to 31 is reserved
for well-known protocols). To enter the
setting, please refer to the setting that
the ISP gave you.
After entering the VPI/VCI value,
please click Next for the following
step.
After unchecking the Auto Scan item,
value to configure a ne
VPI (Virtual Path Identifier):
Identifies the virtual path betwee n
endpoints in an ATM network. The
r to the setting
V
Identifies the
in