Eaton Electrical 10000L(XL), 6000L(XL)

number

Function

description

I/O

3 Rx input

2 Tx output

5 Ground GND

DB-9 pin assignment:

Optional AS400 interface

This optional AS400 card provides dry contact closure signal

“OPEN” or “CLOSE”. Following are the pin assignment and the

descriptions of AS400 card:

PIN1: UPS failure (normally open, active close)

PIN2: summary alarm

PIN3: ground

PIN4: Remote shutdown

PIN5: Common

PIN6: Bypass active (relay close)

PIN7: Battery low

PIN8: UPS On (relay close)

PIN9: Utility Power failure (normally open, active close)

RS232 Interface

AS400 Interface

Contents

Main USER MANUAL ONLINE UPS 6000L(XL)/10000L(XL) Uninterruptible Power Supply CONTENTS 1. Brief introduction 1.1 System and model description 1.2 Description of commonly used symbols 1.3 Appearance Page Electrical performance 2. Installation 2.1 Unpacking and inspection 2.2 Input and output power cords and protective earth ground installation Page Page Page 2.3 time model UPS with the external battery Page 2.4 Parallel operation Note: The requirement of the output wiring is as follows: 3 . Op e ra t io n an d O per at i n g m ode 3.1 Operation Page 3.2 Operating mode Page Page RS232 interface Page 4. Battery maintenance 5. Notes for battery disposal and battery replacement 6. Troubleshooting Page Page Appendix 1 display panel Appendix 2 The corresponding form of the LED display