Data-Line Surge Protection

The built-in data-line surge suppression on the rear panel completes your system protection. It provides an easy way to protect a network (RJ45) or modem (single line phone) connection from hazardous spikes.

RJ45

4.Battery maintenance

This series UPS only requires minimal maintenance. The battery used for standard models are value regulated sealed lead-acid maintenance free battery. These models require minimal repairs. The only requirement is to charge the UPS regularly in order to maximize the expected life of the battery. When being connected to the utility power, whether the UPS is turned on or not, the UPS keeps charging the batteries and also offers the protective function of overcharging and overdischarging.

The UPS should be charged once every 4 to 6 months if it has not been used for a long time.

In the regions of hot climates, the battery should be charged and discharged every 2 months. The standard charging time should be at least 12 hours.

Under normal conditions, the battery life lasts 3 to 5 years. In case if the battery is found not in good condition, earlier replacement should be made. Battery replacement should be performed by qualified personnel.

19

Page 21
Image 21
Eaton Electrical 10000L(XL), 6000L(XL) user manual Battery maintenance