Eaton Electrical 10000L(XL), 6000L(XL)

Important Note: If the UPS is used in Single Mode, JP1 and JP2

must be connected by 10AWG (6mm2). If the UPS is used in Parallel

Mode, the Jumper between JP1 and JP2 must be removed.

● Option: 1

Connect Output Line 1 and Output Neutral 1 for 120V / 3KVA Load or connect by

10AWG (6mm2). Output Line 2 and Output Neutral 2 for 120V / 3KVA Load.

Connection Details of Output Terminals

Connection Details of Output Terminals.

Contents

Main USER MANUAL ONLINE UPS 6000L(XL)/10000L(XL) Uninterruptible Power Supply CONTENTS 1. Brief introduction 1.1 System and model description 1.2 Description of commonly used symbols 1.3 Appearance Page Electrical performance 2. Installation 2.1 Unpacking and inspection 2.2 Input and output power cords and protective earth ground installation Page Page Page 2.3 time model UPS with the external battery Page 2.4 Parallel operation Note: The requirement of the output wiring is as follows: 3 . Op e ra t io n an d O per at i n g m ode 3.1 Operation Page 3.2 Operating mode Page Page RS232 interface Page 4. Battery maintenance 5. Notes for battery disposal and battery replacement 6. Troubleshooting Page Page Appendix 1 display panel Appendix 2 The corresponding form of the LED display