104 | Eclipse - Fujitsu Ten CD8454 guide

How to operate the Sound Adjustment Mode

•The crossover function is a filter that allocates specified frequency bands.

•A high-pass filter (HPF) is a filter that cuts out frequencies that are lower than the specified frequency (bass range) and allows higher frequencies (treble range) to pass through.

•A low-pass filter (LPF) is a filter that cuts out frequencies that are higher than the specified frequency (treble range) and allows lower frequencies (bass range) to pass through.

•The slope is the signal level at which frequencies that are one octave higher or one octave lower are dampened. The larger the slope value, the greater is the slope. In addition, when "PASS" is selected, the slope is eliminated (sound does not pass through the filters), so that the crossover function has no effect.

When this deck is in normal mode, it corresponds to basic speaker systems which comprise front speakers, rear speakers and an added sub-woofer if necessary. In such cases, the crossover can be used to apply the HPF to the front and rear speakers and the LPF to the sub-woofer so that the sound from all speakers merges properly.

In addition, in pro mode, the adjustments can be made to suit speaker system where the front speaker, rear speaker and non-fader output can be switched between Hi, Mid or Low output and the speakers can be combined according to each range (treble range: tweeter, medium range: Mid, bass range: woofer) to provide 3-way playback. In this case, the crossover function can be used to adjust the playback ranges so that the HPF is applied to the treble-range speakers, the HPF and LPF is applied to the medium-range speakers, and the LPF is applied to the bass-range speakers so that the sound from all speakers merges properly.

Bass range

(woofers)			Medium range (Front and rear speakers)
(woofers)

20Hz			20kHz
	fc(LPF/HPF)

		63-200Hz

104

Image 104

Eclipse - Fujitsu Ten CD8454 owner manual 104

Contents

Model CD8454 For your safety in using CD8454 Page Page Page Page Table of Contents How to operate the CD player How to operate the Sound Adjustment Mode 138 How to operate the receiver with an optional Operating precautions About compact discs About CD accessories About brand new CDs About irregularly-shaped CDs How to remove CDsAbout borrowed CDs About Memory Sticks Memory Stick About cleaning the Memory Sticks With the front open Names of controls and partsFront view About ESN Key CD security SeeMemory Stick security See ACC security See Hold both for the more than two seconds Check that the Power is OFFPress and hold button 3, then the Func button, How to operate the ESN Key CD security How to program the Key CDPress the Open button Insert the CD into the slot How to cancel the Key CD Insert your Key CD into the slot Refer to How to program the Key CD How to change the Key CDHow to resume normal operation ESN security lock out Insert the key CD into the slot What happens if an incorrect CD is inserted?Press Func button Insert the Memory Stick into the slot How to operate the ESN Memory Stick securityHow to record a security code Refer to Ejecting the Memory Stick on Press the Func button for more than one secondEject the Memory Stick Press the Func button How to cancel the Memory Stick securitySecurity code is entered by pressing the buttons 1 to Press the Disc button Refer to How to record a security code on How to change the Memory StickRefer to How to cancel the Memory Stick security on How to resume normal operation ESN security lock out Disc button Func button Recorded data will be read from the Memory Stick ESN security operating procedure Func button simultaneously for more than two seconds How to operate the ACC securityOnce a security code has been recorded, press button How to turn the security indicator on/off Hold both for more than one second How to read the Electronic Serial NumberPress and hold button 4, then the Func button, Turning the power on and off Basic operation Insert a CD into the disc slot, label side up Listening to a CDPress the Open button Press the Disc button to switch to the Memory Stick Listening to MG Memory StickInsert a MG Memory Stick into the Memory Stick slot Mode Listening to the tuner Adjusting audio volume Turn the Audio Control button to the left or right Switching audio control modes VOL Volume ModeBass Mode Second to select the item to be adjusted Treb Treble Mode BAL Balance ModeFAD Fader Mode NON-F NON-FADER Mode SVC Source Volume Control Mode Setting examples Settings again Enabling the loudness controlPress and hold the Audio Control button until Loud on display appears on the screen Making changes with Display Adjustment Mode Turn the SEL button in either direction to display settingTo normal music mode Items for selection Switching the display pattern Mode will change to display pattern setting modeTurn the SEL button to select the display pattern Memory Stick Tuner CD changer Switching the motion picture Motion picture selection mode is activatedPress the RTN button Selection item will be highlighted Changing illumination color Switching the brightnessTurn the SEL button to adjust brightness Disabling the display You can turn the display on and off in the following way Making changes with Function Mode Variety of settings can be changedFunction mode is activated Music mode Press the Func or RTN button to exit function mode Disabling the guide tone feature for button operationGuide tone mode will be switched ON/OFF Clock display on/off Switches the clock display to ON/OFFClock display ON/OFF mode is activated This receiver uses the 12-hour display notation Setting the TimeClock adjustment mode is activated Switching demonstration screen display Demo ON/OFF mode is activated Enabling E-COM feature OthersOperation assist function Press the E-COM button for one second Displaying a memo Setting a memoState shifts to the Memo setting mode Memo settings are now completed Deleting a memo Listening to CDs How to operate the CD playerPress the Disc button to switch to the CD player mode Fast Forward/Rewind Playing the beginning of tracks ScanTurn the SEL button to the left or right Press and hold the Seek or Fast button Repeating the same track Repeat Playing tracks in random order RandomPress button 5 to repeat the track being played Press button 6 to play the tracks in random order Switching a CD to pause / play Ejecting the disc Creating a title for a CD Press the Seek button to select the character type Press the Func or RTN button to exit function mode Press the RTN button Press the RTN button Button Page Displaying CD text Press the Disp button for more than one second How to operate the MP3/WMA player What is MP3/WMA?Playable MP3 file standards Playable WMA file standards Media Format of discs File names Multi-sessionsPlaying MP3/WMA MP3/WMA playing time display Listening to MP3/WMA file Press button 1 or Skipping to the next or previous folderReturn to the root directory of the CD Playing the beginning of files Scan Repeating the same file Repeat Playing files in random order Random Displaying title How to operate the Memory Stick player Player mode Fast Forward/Rewind Repeating the same track Repeat Ejecting the Memory Stick Eject the Memory Stick Recording on Memory Stick Insert the MG Memory Stick to be recording the trackMusic CD Press the Func button for more than one second Turn the SEL button to select REC Mode Selecting tracks to be recordedTurn the SEL button to select Memory Stick Press the SEL button Setting sound quality REC quality selection mode is activatedTurn the SEL button to select REC Quality Turn the SEL button to select 66kbps, 105kbps or Deleting recorded file Press the Func button for less than one second, whenRecording file being played back Turn the SEL button to select Delete Formatting MG Memory Stick quick format Turn the SEL button to select FormatMG memory stick can be formatted MG Memory Stick will be formatted Press the RTN button How to operate the tuner Tuning to a station Press the SEL button for more than one second until a Beep is heard Manually setting stations into memory Press the FM AM button to switch between FM and AMTurn the SEL button to the right or left to tune to Station to be entered in memory Preset station scan To stop the preset scan mode at a desired station, pressPress the SEL button for less than one second SEL button again Press the Seek button to select the character type Press the Func or RTN button to exit function mode Button SEL button AM/FM 2/5 CD title memory 40 titlesCD title memory 60 titles CD title memory 80 titles Check that the deck is in standby mode Changing the radio band locationPress and hold the button 1, then FM AM button, Hold both for more than three seconds Fading out FM reception characteristicsFM reception differs from AM Reception area of FM broadcasts Multipath How to operate the Sound Adjustment Mode About Sound Adjustment Mode Graphic equalizer Parametric equalizer How to operate the Sound Adjustment Mode Time Alignment Crossover 104 ISERV sound effect customizations Non-fader phaseMulti-harmonizer Time alignment* and crossover adjustment Frequency characteristic measurementTime alignment and crossover adjustment Saving sound quality data Press the Sound button Operations during Normal ModeTurn the SEL button to select a setting item Press the SEL button for less than one second Equalizer adjustment EQSwitching equalizer modes Press the Sound or RTN button to exit sound adjustment mode Fine-tuning EQ functionsSelect the equalizer mode Turn the SEL button to select the frequency to be adjusted Selecting an equalizer mode from memory Preset pattern stored in memory will be retrievedWhen the preset value is changed, the display shows as ~5 Preset ch No Making fine adjustments to the parametric equalizer Mode will change to parametric equalizer adjustment modeChanged 111 112 Turn the SEL button to select a setting item Simplified time alignment settings Time AlignmentMode will change to time alignment setting mode Position selector setting Position Mode will change to position selector setting modeTurn the SEL button to select the setting item Other time alignment items can be set at this time Mode will change to car type selection mode Selecting the type of vehicle Car TypeTruck 115 Installed 116 Tweeter settings TweeterMode will change to tweeter setting mode 117 Mode will change to rear speaker position setting modeRear speaker position selection Rear SP Crossover adjustment X-Over 119 Multi-harmonizer settings HarmonizerMode will change to multi-harmonizer setting mode Non-fader phase selection NON-F Phase Mode will change to phase selection modeReverse Reverse phase 120 Operations during Pro Mode Mode will switch to sound adjustment mode normal modeTime Alignment Over Harmonizer Non-F Phase 121 Press the Sound button for more than five seconds Parametric equalizer adjustment PEQ Hi-Group Turn the SEL button to select the frequency to be adjusted Normal Sharp Slow Selecting an equalizer mode from memory 125 Measuring/display frequency characteristic Turn the SEL button to select the PEQ Press the Disp button once more to cancel measurement 127 Time alignment adjustment Time Alignment Mode will change to time alignment adjustment mode 129 Mode will change to crossover adjustment mode Turn the SEL button to select the cut-off frequency 131 132 133 Writing/reading sound quality data Writing sound quality data Sound quality data is written to Memory Stick as follows 135 136 Data reading mode is activatedReading sound quality data 137 Data How to use the NOB remote control Precautions in use of the remote control Muting the volume Turning the power on/offAdjusting the audio volume Switching playback modes How to play the tunerPress the Mode button Selecting the FM/AM band How to play CDs Selecting preset stationsSwitching disc modes Selecting a station manually or automatically Illuminating the NOB remote control Enabling the optional E-COM featureSkipping to the next or previous disc Press the Track button Switching the remote control settings Turn the SEL button to select a pattern 144 Replacing the batteryRemove the back cover of the remote control unit by How to use the NOB remote control Press the + or button + button Increases the volume. button Decreases the volumeTo cut the volume or restore it instantly 146 Each press will switch tuner modes from FM1 FM2 FM3 AM 147 Press the Preset CH button Press the Trackaps button. button Skips to the next track 150 On the back of the remote control, while pressing Locking knob on the battery slot cover toward your rightPull out the battery carrier with your fingernail Remove the old battery, then place the new one Press the Disc button Switching the input channelPress the SEL button for more than one second Fast button Repeating the same track Repeat Skipping to the next or previous CD Specifying a CD to play Switch to AUX mode by pressing the Disc button for OthersTurn on the portable audio player and start its play Function Switching the external input method analog/digital Button 4 Switches to analog input 157 If you have a question Displayed information for troubleshooting 159 160 Incompatible Files Has Been Inserted Mode Problem Causes Remedial action Refer To take 161 162 Specifications Before installation Installation angleComponents Qty Mounting instruction Mounting the main unit Fasten the rear of the main unit using either method a Install the bezel on the main unitMount the stud bolt to the main unit Place Names of lead wires and destinations refer to 167 System 168 CD8454 Receiver, used alone 169 CD8454 + CH3083 + Power Amplifier 170 CD8454 + CH3083 + CH3083 + Power Amplifier 171 CD8454 + CH3083 + 21010 + Power Amplifier 172 CD8454 + CH3083 + Power Amplifier for Pro-Mode 173 South Vermont AVENUE, TORRANCE, CA 90502 Phone 310 Phone Taiwan 176 177 178 179 Customer Notice Serial No