How to operate the Sound Adjustment Mode

 

 

 

Buttons [1] to [6]

[SOUND] button [DISP] button

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

[RTN] button

[FAST

] button

[SEEK

] button

5Press the [SEEK /FAST ] button. This adjusts the frequency level. [SEEK ] button: Increases level. [FAST ] button: Decreases level.

6Press the [6] button for less than one second to select the Q curve pattern.

Each time the button is pressed, the Q curve changes in the following order.

NORMAL SHARP SLOW

7Repeat the operations in steps 3 to 6 to change the settings for each channel and band.

The frequencies that have been adjusted for either the channel or band cannot be selected.

8Hold down a button, [1] to [5], for more than two seconds to preset a value.

The preset value is overwritten by the value set using the above steps.

The time alignment and crossover adjustments will also be stored at this time.

9Press the [RTN] button.

At this time, other adjustments can also be made in pro mode.

10Press the [SOUND] or [RTN] button to exit sound adjustment mode.

When updating software, press the [DISP] button to measure and ATTENTION display the frequency characteristics.

124

Page 124
Image 124
Eclipse - Fujitsu Ten CD8454 owner manual Normal Sharp Slow