Eclipse - Fujitsu Ten CD8454 manual

Caution

•Play the audio at a moderate volume level that permits you to hear sounds from outside the car. Driving without being able to hear outside sounds may result in an accident.

•Keep foreign objects out of the disc slot. They may cause fire or electrical shock. Another possibility is that discs may be damaged or become stuck.

•Be careful not to catch your hand/finger when opening/closing the front panel. Doing so may cause personal injury.

•Do not stick your fingers or hands into the disc slot. Doing so may cause personal injury.

•This product must be operated only as on-board equipment, or it may cause electrical shock or injury.

•Do not play distorted sounds for long periods of time; the speakers may overheat and cause a fire.

•Never use batteries other than those specified. Do not mix new and old cells. Doing so may cause a fire or personal injury due to a battery explosion or chemical leaks.

•Pay attention to the (+) and (-) polarity of the battery when installing them in the product. Incorrect installation may cause personal injury or product damage spoilage due to a battery explosion or chemical leakage.

•For best results, this product should be installed by a professional installer.

Contact the dealer whom you purchased the product for an appointment.

•When installing this product, be sure to use the supplied mounting hardware. If parts other than those supplied are used, the unit may be damaged internally, or may not be held in place securely and become dislodged.

5

Image 5

Eclipse - Fujitsu Ten CD8454 owner manual

Contents

Model CD8454 For your safety in using CD8454 Page Page Page Page Table of Contents How to operate the CD player How to operate the Sound Adjustment Mode 138 How to operate the receiver with an optional Operating precautions About compact discs About brand new CDs About CD accessories About irregularly-shaped CDs How to remove CDsAbout borrowed CDs About Memory Sticks Memory Stick About cleaning the Memory Sticks With the front open Names of controls and partsFront view Key CD security See About ESNMemory Stick security See ACC security See Hold both for the more than two seconds Check that the Power is OFFPress and hold button 3, then the Func button, How to program the Key CD How to operate the ESN Key CD securityPress the Open button Insert the CD into the slot Insert your Key CD into the slot How to cancel the Key CD Refer to How to program the Key CD How to change the Key CDHow to resume normal operation ESN security lock out Insert the key CD into the slot What happens if an incorrect CD is inserted?Press Func button Insert the Memory Stick into the slot How to operate the ESN Memory Stick securityHow to record a security code Refer to Ejecting the Memory Stick on Press the Func button for more than one secondEject the Memory Stick Press the Func button How to cancel the Memory Stick securitySecurity code is entered by pressing the buttons 1 to Press the Disc button Refer to How to record a security code on How to change the Memory StickRefer to How to cancel the Memory Stick security on How to resume normal operation ESN security lock out Disc button Func button Recorded data will be read from the Memory Stick ESN security operating procedure Func button simultaneously for more than two seconds How to operate the ACC securityOnce a security code has been recorded, press button How to turn the security indicator on/off Hold both for more than one second How to read the Electronic Serial NumberPress and hold button 4, then the Func button, Basic operation Turning the power on and off Insert a CD into the disc slot, label side up Listening to a CDPress the Open button Listening to MG Memory Stick Press the Disc button to switch to the Memory StickInsert a MG Memory Stick into the Memory Stick slot Mode Listening to the tuner Turn the Audio Control button to the left or right Adjusting audio volume VOL Volume Mode Switching audio control modesBass Mode Second to select the item to be adjusted BAL Balance Mode Treb Treble ModeFAD Fader Mode NON-F NON-FADER Mode Setting examples SVC Source Volume Control Mode Enabling the loudness control Settings againPress and hold the Audio Control button until Loud on display appears on the screen Turn the SEL button in either direction to display setting Making changes with Display Adjustment ModeTo normal music mode Items for selection Mode will change to display pattern setting mode Switching the display patternTurn the SEL button to select the display pattern Memory Stick Tuner CD changer Motion picture selection mode is activated Switching the motion picturePress the RTN button Selection item will be highlighted Changing illumination color Switching the brightnessTurn the SEL button to adjust brightness You can turn the display on and off in the following way Disabling the display Variety of settings can be changed Making changes with Function ModeFunction mode is activated Music mode Press the Func or RTN button to exit function mode Disabling the guide tone feature for button operationGuide tone mode will be switched ON/OFF Clock display on/off Switches the clock display to ON/OFFClock display ON/OFF mode is activated This receiver uses the 12-hour display notation Setting the TimeClock adjustment mode is activated Demo ON/OFF mode is activated Switching demonstration screen display Others Enabling E-COM featureOperation assist function Press the E-COM button for one second Displaying a memo Setting a memoState shifts to the Memo setting mode Deleting a memo Memo settings are now completed Listening to CDs How to operate the CD playerPress the Disc button to switch to the CD player mode Playing the beginning of tracks Scan Fast Forward/RewindTurn the SEL button to the left or right Press and hold the Seek or Fast button Playing tracks in random order Random Repeating the same track RepeatPress button 5 to repeat the track being played Press button 6 to play the tracks in random order Ejecting the disc Switching a CD to pause / play Press the Seek button to select the character type Creating a title for a CD Press the RTN button Press the Func or RTN button to exit function mode Press the RTN button Button Page Press the Disp button for more than one second Displaying CD text What is MP3/WMA? How to operate the MP3/WMA playerPlayable MP3 file standards Playable WMA file standards Format of discs Media Multi-sessions File namesPlaying MP3/WMA MP3/WMA playing time display Listening to MP3/WMA file Press button 1 or Skipping to the next or previous folderReturn to the root directory of the CD Repeating the same file Repeat Playing the beginning of files Scan Playing files in random order Random Displaying title Player mode How to operate the Memory Stick player Fast Forward/Rewind Repeating the same track Repeat Eject the Memory Stick Ejecting the Memory Stick Insert the MG Memory Stick to be recording the track Recording on Memory StickMusic CD Press the Func button for more than one second Selecting tracks to be recorded Turn the SEL button to select REC ModeTurn the SEL button to select Memory Stick Press the SEL button REC quality selection mode is activated Setting sound qualityTurn the SEL button to select REC Quality Turn the SEL button to select 66kbps, 105kbps or Press the Func button for less than one second, when Deleting recorded fileRecording file being played back Turn the SEL button to select Delete Turn the SEL button to select Format Formatting MG Memory Stick quick formatMG memory stick can be formatted MG Memory Stick will be formatted Press the RTN button Tuning to a station How to operate the tuner Beep is heard Press the SEL button for more than one second until a Press the FM AM button to switch between FM and AM Manually setting stations into memoryTurn the SEL button to the right or left to tune to Station to be entered in memory To stop the preset scan mode at a desired station, press Preset station scanPress the SEL button for less than one second SEL button again Press the Seek button to select the character type Press the Func or RTN button to exit function mode Button SEL button CD title memory 40 titles AM/FM 2/5CD title memory 60 titles CD title memory 80 titles Changing the radio band location Check that the deck is in standby modePress and hold the button 1, then FM AM button, Hold both for more than three seconds Fading out FM reception characteristicsFM reception differs from AM Multipath Reception area of FM broadcasts About Sound Adjustment Mode How to operate the Sound Adjustment Mode Parametric equalizer Graphic equalizer How to operate the Sound Adjustment Mode Time Alignment Crossover 104 ISERV sound effect customizations Non-fader phaseMulti-harmonizer Frequency characteristic measurement Time alignment* and crossover adjustmentTime alignment and crossover adjustment Saving sound quality data Press the Sound button Operations during Normal ModeTurn the SEL button to select a setting item Press the SEL button for less than one second Equalizer adjustment EQSwitching equalizer modes Fine-tuning EQ functions Press the Sound or RTN button to exit sound adjustment modeSelect the equalizer mode Turn the SEL button to select the frequency to be adjusted Preset pattern stored in memory will be retrieved Selecting an equalizer mode from memoryWhen the preset value is changed, the display shows as ~5 Preset ch No Mode will change to parametric equalizer adjustment mode Making fine adjustments to the parametric equalizerChanged 111 112 Turn the SEL button to select a setting item Simplified time alignment settings Time AlignmentMode will change to time alignment setting mode Mode will change to position selector setting mode Position selector setting PositionTurn the SEL button to select the setting item Other time alignment items can be set at this time Selecting the type of vehicle Car Type Mode will change to car type selection modeTruck 115 Installed 116 Tweeter settings TweeterMode will change to tweeter setting mode 117 Mode will change to rear speaker position setting modeRear speaker position selection Rear SP Crossover adjustment X-Over 119 Multi-harmonizer settings HarmonizerMode will change to multi-harmonizer setting mode Mode will change to phase selection mode Non-fader phase selection NON-F PhaseReverse Reverse phase 120 Mode will switch to sound adjustment mode normal mode Operations during Pro ModeTime Alignment Over Harmonizer Non-F Phase 121 Press the Sound button for more than five seconds Hi-Group Parametric equalizer adjustment PEQ Turn the SEL button to select the frequency to be adjusted Normal Sharp Slow 125 Selecting an equalizer mode from memory Turn the SEL button to select the PEQ Measuring/display frequency characteristic 127 Press the Disp button once more to cancel measurement Mode will change to time alignment adjustment mode Time alignment adjustment Time Alignment 129 Turn the SEL button to select the cut-off frequency Mode will change to crossover adjustment mode 131 132 133 Writing sound quality data Writing/reading sound quality data 135 Sound quality data is written to Memory Stick as follows 136 Data reading mode is activatedReading sound quality data Data 137 Precautions in use of the remote control How to use the NOB remote control Muting the volume Turning the power on/offAdjusting the audio volume How to play the tuner Switching playback modesPress the Mode button Selecting the FM/AM band Selecting preset stations How to play CDsSwitching disc modes Selecting a station manually or automatically Enabling the optional E-COM feature Illuminating the NOB remote controlSkipping to the next or previous disc Press the Track button Turn the SEL button to select a pattern Switching the remote control settings 144 Replacing the batteryRemove the back cover of the remote control unit by How to use the NOB remote control Press the + or button + button Increases the volume. button Decreases the volumeTo cut the volume or restore it instantly 146 Each press will switch tuner modes from FM1 FM2 FM3 AM 147 Press the Preset CH button Press the Trackaps button. button Skips to the next track 150 Locking knob on the battery slot cover toward your right On the back of the remote control, while pressingPull out the battery carrier with your fingernail Remove the old battery, then place the new one Press the Disc button Switching the input channelPress the SEL button for more than one second Fast button Repeating the same track Repeat Specifying a CD to play Skipping to the next or previous CD Others Switch to AUX mode by pressing the Disc button forTurn on the portable audio player and start its play Function Button 4 Switches to analog input 157 Switching the external input method analog/digital If you have a question 159 Displayed information for troubleshooting Incompatible Files Has Been Inserted 160 161 Mode Problem Causes Remedial action Refer To take 162 Specifications Installation angle Before installationComponents Qty Mounting the main unit Mounting instruction Install the bezel on the main unit Fasten the rear of the main unit using either method aMount the stud bolt to the main unit Place 167 Names of lead wires and destinations refer to 168 System 169 CD8454 Receiver, used alone 170 CD8454 + CH3083 + Power Amplifier 171 CD8454 + CH3083 + CH3083 + Power Amplifier 172 CD8454 + CH3083 + 21010 + Power Amplifier 173 CD8454 + CH3083 + Power Amplifier for Pro-Mode Phone South Vermont AVENUE, TORRANCE, CA 90502 Phone 310 Taiwan 176 177 178 179 Serial No Customer Notice