How to operate the Sound Adjustment Mode

How to operate the Sound Adjustment Mode

About Sound Adjustment Mode

This deck is equipped with two different sound adjustment modes: normal mode and pro mode.

In normal mode, the acoustic characteristics inside the vehicle can be adjusted using comparatively simple settings. In addition, it corresponds to basic sound systems which comprise front speakers, rear speakers and an added sub-woofer if necessary.

In pro mode, the sound quality characteristics can be adjusted item by item using more sophisticated settings than in normal mode. In addition, the adjustments can be made to suit 3-way speaker system where the front speaker, rear speaker and non-fader output can be set to Hi (treble range) Mid (medium range) or Low (bass range). Refer to the table below and to the operations for each mode for details of each mode.

The following adjustments can be made in normal mode and pro mode respectively.

 

Normal mode

Pro mode

 

 

 

Graphic equalizer

(See page 108)

×

 

 

 

Parametric equalizer

(single-band *1)

(See page 122)

(See page 111)

 

 

 

 

 

Time alignment

(Simplified)

(See page 128)

(See page 113)

 

 

 

 

 

Crossover

(See page 118)

(See page 130)

 

 

 

Multi-harmonizer

(See page 119)

(See page 132)

 

 

 

Non-fader phase

(See page 120)

(See page 133)

 

 

 

BASS/TREBLE *2

×

E-iSERV sound effect

 

(See page 105)

customizations

×

(Parametric equalizer)

 

 

E-iSERV sound effect

(Simplified)

(See page 105)

customizations

(See page 105)

(Time alignment)

 

 

 

E-iSERV sound effect

(See page 105)

(See page 105)

customizations

(Crossover)

 

 

*1: In normal mode, the parametric equalizer is adjusted during EQ mode.

*2: Adjusted during audio control mode (see page 42).

99

Page 99
Image 99
Eclipse - Fujitsu Ten CD8454 owner manual How to operate the Sound Adjustment Mode, About Sound Adjustment Mode