29
ESN security operating procedure
[FUNC] button
Button [1]
[DISC] button
Canceling the security function using a Memory Stick
Check that the Power is OFF.
Press and hold button [1], then the [FUNC] button, and
hold both for more than one second.
A [SEC] message appears, then in two seconds it will
change the [- - - -] (Security code input display).
Press the [DISC] button.
A [MS] message will appear. To change the [- - - -]
(Security code input display), to press the [DISC] button
again.
3
2
1
ATTENTION
If a Memory Stick has already been inserted, a [MS EJECT]
message appears. In this case, eject the Memory Stick and
insert again. (Refer to "Ejecting the Memory Stick" on page 81 for
details on ejection of the Memory Stick.)