How to operate the Sound Adjustment Mode

[SOUND] button [SEEK ] button

[RTN] button [FAST ] button [SEL] button

Crossover adjustment (X-Over)

The frequencies for the front and rear speaker high-pass filter (HPF) and woofer low-pass filter (LPF) can be set within a range of 63 to 200 Hz. (This is the same as the HPF and LPF cutoff frequencies.)

1Turn the [SEL] button to select X-Over. The selected item will be highlighted.

2Press the [SEL] button.

The mode will change to crossover setting mode.

3Turn the [SEL] button to select the cut-off frequency. When the button is turned, the frequency changes in the following order.

63Hz 80Hz 100Hz 125Hz 160Hz 200Hz

4Press the [SEEK /FAST ] buttons to set the slope. [SEEK ] button: PASS

[FAST ] button: 12dB/oct

If no woofer has been connected, set the slope adjustment to ATTENTION "PASS". (If you set the slope to 12 dB/oct, the bass sound will not

be output from the speakers.

5Press the [RTN] button.

At this time, other adjustments can also be made in normal mode.

6Press the [SOUND] or [RTN] button to exit sound adjustment mode.

118

Page 118
Image 118
Eclipse - Fujitsu Ten CD8454 owner manual Crossover adjustment X-Over