Eclipse - Fujitsu Ten CD8454 owner manual Disc button Func button

ESN security operating procedure

[DISC] button

[FUNC] button

3Press the [FUNC] button for more than one second.

If the security code matches the code recorded by the deck, [OK] will appear on the display and the security function will be canceled.

•If the security code does not match the information recorded ATTENTION by the deck, [ERR_] (ERR and the error number) will appear on the display for two seconds, and then [- - - -] (security code entry display) will appear. If this happens, check the security

code and repeat the procedure from step 2.

•If [ERR5] (the 5th time an error has occurred) appears, [HELP] will appear. When [HELP] appears, carry out the operations for an ESN security lock out by following the procedure in " What happens if a Memory Stick or security code is incorrect?" on page 34.

Canceling ESN security lock using Memory Stick

1After the battery is connected and the deck's power is turned on, [SEC] will appear on the display for two seconds. After this, [- - - -] (security code entry display) will appear.

2Press the [DISC] button.

[MS] will appear on the display. If you press the [DISC] button once more, the display will return to [----] (security code entry display).

If a Memory Stick has already been inserted, a [MS EJECT] ATTENTION message appears. In this case, eject the Memory Stick and insert again. (Refer to "Ejecting the Memory Stick" on page 81 for

details on ejection of the Memory Stick.)

32