167 | Eclipse - Fujitsu Ten CD8454 specification

Mounting instruction

Names of lead wires and destinations (refer to Page 168)

Caution

Never connect the power supply to the speaker leads, otherwise it cause damage to the main unit.

Note

To prevent unconnected leads from shorting out, insulate them by wrapping their tips with electrical tape. Similarly, insulate the ends of connected leads.

If an external amplifier is to be connected to the receiver, be sure to ground its outside housing to the vehicle body (a metal part).

No.	Name	Wire color	Destination

1	ACC	Red	Connect where the power comes on
			when the ignition is in the ACC
			position.

2	B+	Yellow	Connect where the power is constantly
			available, regardless of the ignition
			switch's position.

3	Ground	Black	Connect where good body grounding
			is available.

4	Antenna power supply Blue		Connect to the automatic-antenna
			control terminal of the vehicle.

5	Illumination power supply Orange/White		Connect to where power comes on
			when the headlights are turned on.

6	Control power supply	Blue/White	Connect to the control terminal for
			the external amplifier, etc.

7	E-LAN terminal		Connect to the E-LAN terminal of the
			CD changer, etc.

8	Line-in/out terminals (Front/Hi)		Connect to the RCA input connectors
9	Line-in/out terminals (Rear/Mid)		of an external amplifier,or to the RCA
			output connectors of a EQ.

10 Line-out terminals (Nonfader/Low)

Connect to the RCA input connectors of a EQ, or the RCA input connectors of a woofer amplifier.

11	Speaker leads		Connect them to their respective
			reads.

12	Cellular phone mute	Pink	Connect to the ground output terminal
			on a mobile phone.

13	Digital in terminal		Connect to digital output terminal of the
			CD changer.

167

Image 167

Eclipse - Fujitsu Ten CD8454 owner manual Names of lead wires and destinations refer to, 167

Contents

Model CD8454 For your safety in using CD8454 Page Page Page Page Table of Contents How to operate the CD player How to operate the Sound Adjustment Mode 138 How to operate the receiver with an optional Operating precautions About compact discs About brand new CDs About CD accessories About irregularly-shaped CDs How to remove CDsAbout borrowed CDs About Memory Sticks Memory Stick About cleaning the Memory Sticks With the front open Names of controls and partsFront view ACC security See About ESNKey CD security See Memory Stick security See Hold both for the more than two seconds Check that the Power is OFFPress and hold button 3, then the Func button, Insert the CD into the slot How to operate the ESN Key CD securityHow to program the Key CD Press the Open button Insert your Key CD into the slot How to cancel the Key CD Refer to How to program the Key CD How to change the Key CDHow to resume normal operation ESN security lock out Insert the key CD into the slot What happens if an incorrect CD is inserted?Press Func button Insert the Memory Stick into the slot How to operate the ESN Memory Stick securityHow to record a security code Refer to Ejecting the Memory Stick on Press the Func button for more than one secondEject the Memory Stick Press the Func button How to cancel the Memory Stick securitySecurity code is entered by pressing the buttons 1 to Press the Disc button Refer to How to record a security code on How to change the Memory StickRefer to How to cancel the Memory Stick security on How to resume normal operation ESN security lock out Disc button Func button Recorded data will be read from the Memory Stick ESN security operating procedure Func button simultaneously for more than two seconds How to operate the ACC securityOnce a security code has been recorded, press button How to turn the security indicator on/off Hold both for more than one second How to read the Electronic Serial NumberPress and hold button 4, then the Func button, Basic operation Turning the power on and off Insert a CD into the disc slot, label side up Listening to a CDPress the Open button Mode Press the Disc button to switch to the Memory StickListening to MG Memory Stick Insert a MG Memory Stick into the Memory Stick slot Listening to the tuner Turn the Audio Control button to the left or right Adjusting audio volume Second to select the item to be adjusted Switching audio control modesVOL Volume Mode Bass Mode NON-F NON-FADER Mode Treb Treble ModeBAL Balance Mode FAD Fader Mode Setting examples SVC Source Volume Control Mode Loud on display appears on the screen Settings againEnabling the loudness control Press and hold the Audio Control button until Items for selection Making changes with Display Adjustment ModeTurn the SEL button in either direction to display setting To normal music mode Memory Stick Tuner CD changer Switching the display patternMode will change to display pattern setting mode Turn the SEL button to select the display pattern Selection item will be highlighted Switching the motion pictureMotion picture selection mode is activated Press the RTN button Changing illumination color Switching the brightnessTurn the SEL button to adjust brightness You can turn the display on and off in the following way Disabling the display Music mode Making changes with Function ModeVariety of settings can be changed Function mode is activated Press the Func or RTN button to exit function mode Disabling the guide tone feature for button operationGuide tone mode will be switched ON/OFF Clock display on/off Switches the clock display to ON/OFFClock display ON/OFF mode is activated This receiver uses the 12-hour display notation Setting the TimeClock adjustment mode is activated Demo ON/OFF mode is activated Switching demonstration screen display Press the E-COM button for one second Enabling E-COM featureOthers Operation assist function Displaying a memo Setting a memoState shifts to the Memo setting mode Deleting a memo Memo settings are now completed Listening to CDs How to operate the CD playerPress the Disc button to switch to the CD player mode Press and hold the Seek or Fast button Fast Forward/RewindPlaying the beginning of tracks Scan Turn the SEL button to the left or right Press button 6 to play the tracks in random order Repeating the same track RepeatPlaying tracks in random order Random Press button 5 to repeat the track being played Ejecting the disc Switching a CD to pause / play Press the Seek button to select the character type Creating a title for a CD Press the RTN button Press the Func or RTN button to exit function mode Press the RTN button Button Page Press the Disp button for more than one second Displaying CD text Playable WMA file standards How to operate the MP3/WMA playerWhat is MP3/WMA? Playable MP3 file standards Format of discs Media MP3/WMA playing time display File namesMulti-sessions Playing MP3/WMA Listening to MP3/WMA file Press button 1 or Skipping to the next or previous folderReturn to the root directory of the CD Repeating the same file Repeat Playing the beginning of files Scan Playing files in random order Random Displaying title Player mode How to operate the Memory Stick player Fast Forward/Rewind Repeating the same track Repeat Eject the Memory Stick Ejecting the Memory Stick Press the Func button for more than one second Recording on Memory StickInsert the MG Memory Stick to be recording the track Music CD Press the SEL button Turn the SEL button to select REC ModeSelecting tracks to be recorded Turn the SEL button to select Memory Stick Turn the SEL button to select 66kbps, 105kbps or Setting sound qualityREC quality selection mode is activated Turn the SEL button to select REC Quality Turn the SEL button to select Delete Deleting recorded filePress the Func button for less than one second, when Recording file being played back MG Memory Stick will be formatted Formatting MG Memory Stick quick formatTurn the SEL button to select Format MG memory stick can be formatted Press the RTN button Tuning to a station How to operate the tuner Beep is heard Press the SEL button for more than one second until a Station to be entered in memory Manually setting stations into memoryPress the FM AM button to switch between FM and AM Turn the SEL button to the right or left to tune to SEL button again Preset station scanTo stop the preset scan mode at a desired station, press Press the SEL button for less than one second Press the Seek button to select the character type Press the Func or RTN button to exit function mode Button SEL button CD title memory 80 titles AM/FM 2/5CD title memory 40 titles CD title memory 60 titles Hold both for more than three seconds Check that the deck is in standby modeChanging the radio band location Press and hold the button 1, then FM AM button, Fading out FM reception characteristicsFM reception differs from AM Multipath Reception area of FM broadcasts About Sound Adjustment Mode How to operate the Sound Adjustment Mode Parametric equalizer Graphic equalizer How to operate the Sound Adjustment Mode Time Alignment Crossover 104 ISERV sound effect customizations Non-fader phaseMulti-harmonizer Saving sound quality data Time alignment* and crossover adjustmentFrequency characteristic measurement Time alignment and crossover adjustment Press the Sound button Operations during Normal ModeTurn the SEL button to select a setting item Press the SEL button for less than one second Equalizer adjustment EQSwitching equalizer modes Turn the SEL button to select the frequency to be adjusted Press the Sound or RTN button to exit sound adjustment modeFine-tuning EQ functions Select the equalizer mode ~5 Preset ch No Selecting an equalizer mode from memoryPreset pattern stored in memory will be retrieved When the preset value is changed, the display shows as 111 Making fine adjustments to the parametric equalizerMode will change to parametric equalizer adjustment mode Changed 112 Turn the SEL button to select a setting item Simplified time alignment settings Time AlignmentMode will change to time alignment setting mode Other time alignment items can be set at this time Position selector setting PositionMode will change to position selector setting mode Turn the SEL button to select the setting item 115 Mode will change to car type selection modeSelecting the type of vehicle Car Type Truck Installed 116 Tweeter settings TweeterMode will change to tweeter setting mode 117 Mode will change to rear speaker position setting modeRear speaker position selection Rear SP Crossover adjustment X-Over 119 Multi-harmonizer settings HarmonizerMode will change to multi-harmonizer setting mode 120 Non-fader phase selection NON-F PhaseMode will change to phase selection mode Reverse Reverse phase Press the Sound button for more than five seconds Operations during Pro ModeMode will switch to sound adjustment mode normal mode Time Alignment Over Harmonizer Non-F Phase 121 Hi-Group Parametric equalizer adjustment PEQ Turn the SEL button to select the frequency to be adjusted Normal Sharp Slow 125 Selecting an equalizer mode from memory Turn the SEL button to select the PEQ Measuring/display frequency characteristic 127 Press the Disp button once more to cancel measurement Mode will change to time alignment adjustment mode Time alignment adjustment Time Alignment 129 Turn the SEL button to select the cut-off frequency Mode will change to crossover adjustment mode 131 132 133 Writing sound quality data Writing/reading sound quality data 135 Sound quality data is written to Memory Stick as follows 136 Data reading mode is activatedReading sound quality data Data 137 Precautions in use of the remote control How to use the NOB remote control Muting the volume Turning the power on/offAdjusting the audio volume Selecting the FM/AM band Switching playback modesHow to play the tuner Press the Mode button Selecting a station manually or automatically How to play CDsSelecting preset stations Switching disc modes Press the Track button Illuminating the NOB remote controlEnabling the optional E-COM feature Skipping to the next or previous disc Turn the SEL button to select a pattern Switching the remote control settings 144 Replacing the batteryRemove the back cover of the remote control unit by How to use the NOB remote control Press the + or button + button Increases the volume. button Decreases the volumeTo cut the volume or restore it instantly 146 Each press will switch tuner modes from FM1 FM2 FM3 AM 147 Press the Preset CH button Press the Trackaps button. button Skips to the next track 150 Remove the old battery, then place the new one On the back of the remote control, while pressingLocking knob on the battery slot cover toward your right Pull out the battery carrier with your fingernail Press the Disc button Switching the input channelPress the SEL button for more than one second Fast button Repeating the same track Repeat Specifying a CD to play Skipping to the next or previous CD Function Switch to AUX mode by pressing the Disc button forOthers Turn on the portable audio player and start its play Button 4 Switches to analog input 157 Switching the external input method analog/digital If you have a question 159 Displayed information for troubleshooting Incompatible Files Has Been Inserted 160 161 Mode Problem Causes Remedial action Refer To take 162 Specifications Qty Before installationInstallation angle Components Mounting the main unit Mounting instruction Place Fasten the rear of the main unit using either method aInstall the bezel on the main unit Mount the stud bolt to the main unit 167 Names of lead wires and destinations refer to 168 System 169 CD8454 Receiver, used alone 170 CD8454 + CH3083 + Power Amplifier 171 CD8454 + CH3083 + CH3083 + Power Amplifier 172 CD8454 + CH3083 + 21010 + Power Amplifier 173 CD8454 + CH3083 + Power Amplifier for Pro-Mode Phone South Vermont AVENUE, TORRANCE, CA 90502 Phone 310 Taiwan 176 177 178 179 Serial No Customer Notice