| Parameter |
| Description |
| Login ID | Enter the Login ID provided by your ISP for the PPPoE connection | |
|
|
| |
| Password | Enter the Password provided by your ISP for the PPPoE connection | |
|
|
|
|
| Service Name |
| This is optional. Enter the Service name should your ISP requires it, otherwise |
|
| leave it blank. | |
|
|
| |
| AC Name |
| This is optional. Enter the AC Name should your ISP requires it, otherwise |
|
| leave it blank. | |
|
|
| |
|
|
|
|
| MTU |
| This is optional. You can specify the maximum size of your transmission packet |
|
| to the Internet. Leave it as it is if you to not wish to set a maximum packet size. | |
|
|
| |
|
|
|
|
| Dial On Demand |
| If checked, gateway won’t dial this session until received a packet that |
|
| requested Internet access. If unchecked, gateway dials this session | |
|
|
| immediately after system powered up. |
|
|
|
|
| Silent Timeout |
| If specified a |
|
| idle time. | |
|
|
| |
|
|
|
|
| Auto Reconnect |
| If checked, gateway redials this session if session previously terminated by |
|
| ISP. | |
|
|
| |
| Auth Type |
| Select PAP or CHAP for the authentication type requested by your ISP. |
|
|
|
|
Click <OK> when you have finished the configuration above. Congratulations! You have completed the configuration for the PPPoE connection. You can start using the router now, if you wish to use some of the advance features supported by this router see chapter 2, 3, 4.
1.4 PPTP
Select PPTP if your ISP requires the PPTP protocol to connect you to the Internet. Your ISP should provide all the information required in this section.
16
