Parameter Description
UPnP Feature
You can Enable or Disable UPnP feature here. After you enable the UPnP
feature, all client systems that support UPnP, like Windows XP, can discover
this router automatically and access the Internet through this router without any
configuration. The NAT Traversal function provided by UPnP can let
applications that support UPnP smoothly connect to Internet sites without any
incompatibility problem due to the NAPT port translation.
Click <Apply> at the bottom of the screen to save the above configurations. You can now configure other
advance sections or start using the router (with the advance settings in place)
This router provides Static Routing function when NAT is disabled. With Static Routing, the router can
forward packets according to your routing rules. The IP sharing function will not work any more in Static
Routing mode.
Note: The DMZ function of firewall will not work if static routing is enabled.
Parameter Description
Route The network address of destination LAN.
Route Mask The subnet mask of destination LAN.
Next Hop IP The next stop gateway of the path toward the destination LAN. This is the IP of
the neighbor router that this router should communicate with on the path to the
destination LAN.
Interface The interface that go to the next hop (router).
Click <Apply> at the bottom of the screen to save the above configurations. You can now configure other
advance sections or start using the router (with the advance settings in place)