Chapter 2 General Settings
Once you click on the General Setup button at the Home Page, you should see the screen below.
If you have already configured the Quick Setup Wizard you do NOT need to configure anything thing in the
General Setup screen for you to start using the Internet.
The General Setup contains advanced features that allow you to configure the router to meet your network’s
needs such as: Wireless, Address Mapping, Virtual Server, Access Control, Hacker Attack Prevention,
Special Applications, DMZ and other functions.
Below is a general description of what advance functions are available for this broadband router.
Menu Description
System This section allows you to set the Broadband router’s system Time Zone,
Password and Remote Management Administrator.
WAN This section allows you to select the connection method in order to establish a
connection with your ISP (same as the Quick Setup Wizard section)
LAN You can specify the LAN segment’s IP address, subnet Mask, enable/disable
DHCP and select an IP range for your LAN
Wireless You can setup the wireless LAN’s SSID, WEP key, MAC filtering.
QoS You can setup the QoS bandwidth control policy.
NAT You can configure the Address Mapping, Virtual Server and Special
Applications functions in this section. This allows you to specify what
user/packet can pass your router’s NAT.
Firewall The Firewall section allows you to configure Access Control, Hacker Prevention
and DMZ.
Select one of the above General Setup selections and proceed to the manual’s relevant sub-section