Here are descriptions of every setup items:
Item Name | Description |
Protocol | Please select the protocol type of this service: |
| TCP or UDP, or ‘Both’. |
Port Range | Please input the port range if this service. For |
| a single port number, just input the number of |
| service port (like ‘110’). |
| If this service consists multiple continuous |
| ports, you can input |
| 110 to 120, or ’110,115,120’ for port number |
| 110, 115, and 120. |
Click ‘Add’ to add this IP address restriction rule to the list (and back to previous page), or click ‘Reset’ to clear all texts in every field.
When you finished with the settings in this page, you can click ‘Apply’ button to save changes you made in this page, or you can click ‘Cancel’ to discard changes. After you click ‘Apply’ button, you’ll see the following messages:
Please click ‘Apply’ to save changes you made and restart the broadband router, this requires about 30 seconds and the broadband router will stop responding (this is normal and is not malfunction). You can reconnect to this broadband router and continue on other settings later.
