In this mode, this broadband router acts as a wireless repeater. It will repeat the signal of the wireless access point you specified, to extend its wireless coverage. The broadband router will still accept wireless clients when in this mode.
Note : You will not get this mode, when you enable WISP.
Here are descriptions of every setup items:
Item Name | Description |
Band | Please select the radio band from one of |
| following options (must be the same with the |
| wireless access point you wish to connect): |
| 2.4 GHz (B): 2.4GHz band, only allows |
| 802.11b wireless network client to connect this |
| router (maximum transfer rate 11Mbps). |
| 2.4 GHz (N): 2.4GHz band, only allows |
| 802.11n wireless network client to connect this |
| router (maximum transfer rate 150Mbps). |
| 2.4 GHz (B+G): 2.4GHz band, only allows |
| 802.11b and 802.11g wireless network client to |
| connect this router (maximum transfer rate |
95
