![](/images/new-backgrounds/1237092/23709269x1.webp)
SYSTEM AND GROUP SCANNING
Using Menu Mode
1.To select the menu mode, press the Menu switch or FCN FCN (the FCN switch twice). The top line of the display indicates the func- tion being edited, and the bottom line indicates the current status of that function (see following illustration).
![](/images/new-backgrounds/1237092/23709269xi2.webp)
Function
Status
2.To display the various functions that are controllable by the menu mode (top line indication), rotate the Select switch. The currently selected status of that function is displayed on the bottom line.
3.To change the selected status, press the Select switch. The selec- tions displayed for each menu function are shown on page 52.
4.The selected status conditions for the various functions are saved when the menu mode is exited in one of the following ways:
•Pressing the FCN switch again
•Pressing the PTT switch
•Automatically when
SYSTEM AND GROUP SCANNING
General
Introduction
The scan feature monitors, in sequence, the programmed
systems and/or groups in the scan list. When a message is detected that the transceiver is programmed to receive, scanning stops and the
35