Manuals / EFJohnson / Communications / Two-Way Radio

EFJohnson 98x6, 98x3, 002-9803-601 manual Roaming

Models: 98x3 002-9803-601 98x6

1 56

Download 56 pages 24.65 Kb

Page 43

LTR-NET FEATURES

Roaming

LTR-Net radio localities (sites) can be linked together to provide wide area coverage. Then as you travel from locality to locality with roaming enabled, calls are automatically routed to your current location. Both standard group and special calls may be routed to other localities. To utilize the Roaming feature, proceed as follows:

1.An LTR-Net system must be selected. When an LTR or conven- tional system is selected, roaming is disabled.

2.Roaming must be enabled by the ROAM option switch or ROAMING menu parameter (see page 33) if available. When roaming is enabled and disabled by the option switch, “ROAM ON” and “ROAM OFF” are momentarily displayed. If neither the menu parameter nor option switch is available, roaming is fixed in the on or off mode by programming.

3.Scanning does not need to be enabled. If it is, an LTR-Net system must be selected.

When roaming is enabled as just described and the signal from the current locality becomes weak, the transceiver automatically begins searching for another locality. While searching is occurring, “LCL SRCH” is displayed as shown below. Then when a new locality is located, registration occurs and “LCL SRCH” is no longer displayed. The displayed system is the next LTR-Net system programmed with a different locality that could be accessed, and the displayed group is usually the group that was displayed before roaming occurred.

43

Image 43

EFJohnson 98x6, 98x3, 002-9803-601 manual Roaming

Contents

LTR-Net 9800 Series Page Page Safety Information FCC Exposure Limits Frequency Whip Model No Base Model No Table of Contents Table of Contents Quick Reference Guide General Features FeaturesFront Panel Controls Controls and DisplayMicrophone Push-To-Talk PTT Switch Not Shown Push Rear Panel Jacks and Connectors Display Description Determining Volume Level Power-Up SequenceGeneral Operation System/Group Display Modes Numeric Display ModeAlpha Display Mode Backlight OperationSelect Mode Indication With Alpha Tag Display Select Mode Indication With Numeric DisplaySelecting the System and Group Microphone Off-Hook Detect Setting Squelch ControlIntroduction LTR-Net, LTR, and Conventional OperationBank Select General FeaturesEmergency Switch Call IndicatorEncryption Home System/Group Select Function FCN SwitchHorn Alert Horn Alert EnabledOption Select Power Turn-Off DelayReceive-Only Groups Proceed Clear-To-Talk ToneTime-Out Timer Stealth ModeTone Select Placing a Standard Group Call Standard Group CallsTransmitter Thermal Foldback GeneralConventional Operation LTR-Net and LTR OperationReceiving a Standard Group Call Telephone CallsPlacing Telephone Calls Receiving a Telephone Call Landside-Originate Telephone Calls LTR-NET Auxiliary CallsReceiving Auxiliary Calls Placing LTR-Net Auxiliary CallsOption Switches Option Switches Menu ModeMenu Mode Introduction Switch Menu Mode and Option Switch FunctionsSystem and Group Scanning Using Menu ModeSystem and Group Scanning System and Group Scanning Scan List Programming Scan Delay and Continue Timers Transmitting In The Scan ModeTransmit Inhibit LTR-NET and LTR FeaturesTelephone Group Select Calls on Priority ID CodesLTR-Net Standard and Special Calls LTR-NET FeaturesBusy Queuing Roaming Telephone Calls LTR FeaturesConventional Features Standard Group CallsMonitor Mode Selected Talk-Around Transmit Disable On BusyCall Guard Squelch MiscellaneousSupervisory Tones Miscellaneous LTR Telephone Call Tones LTR-Net Special Call TonesDisplay Messages Miscellaneous Bright DIM OFF Menu Mode MessagesSpeaking Into Microphone System Operator ProgrammingOperation At Extended Range Preventing Battery DischargeLicensing Transceiver Service Miscellaneous