FCC Exposure Limits | EFJohnson 002-9803-601, 98x3, 98x6 manual

SAFETY INFORMATION

FCC EXPOSURE LIMITS

This mobile radio transceiver was tested by the manufacturer with an appropriate antenna in order to verify compliance with Maximum Permissible Exposure (MPE) limits set under Section 2.1091 of the FCC Rules and Regulations. The guidelines used in the evaluation are derived from Figure 1 (B) titled “Limits For General Population/Uncontrolled Exposure” which is from FCC report OET bulletin #65.

Figure 1

FCC Limits for Maximum Permissible Exposure (MPE)

(A) Limits For Occupational/Controlled Exposure

	Frequency Range	Electric Field	Magnetic Field	Power Density	Averaging
	(MHz)	Strength (E)	Strength (H)	(S)	Time E2, H2,
	(MHz)	(V/m)	(A/m)	(mW/cm22)	S (minutes)
		(V/m)	(A/m)	(mW/cm22)	S (minutes)
	0.3-3.0	614	1.63	(100)*	6
	3.0-30	1842/f	4.89/f	(900/f2)*	6
	30-300	61.4	0.163	1.0	6
	300-1500	--	--	f/300	6
	1500-100,000	--	--	5	6

(B) Limits For General Population/Uncontrolled Exposure

	Frequency Range	Electric Field	Magnetic Field	Power Density	Averaging
	(MHz)	Strength (E)	Strength (H)	(S)	Time E2, H2,
	(MHz)	(V/m)	(A/m)	(mW/cm22)	S (minutes)
		(V/m)	(A/m)	(mW/cm22)	S (minutes)
	0.3-1.34	614	1.63	(100)*	30
	1.34-30	824/f	2.19/f	(180/f2)*	30
	30-300	27.5	0.073	0.2	30
	300-1500	--	--	f/1500	30
	1500-100,000	--	--	1.0	30

	f = Frequency in	MHz	*Plane-wave	equivalent power	density

5

Image 5

EFJohnson 002-9803-601, 98x3, 98x6 manual FCC Exposure Limits

Contents

LTR-Net 9800 Series Page Page Safety Information FCC Exposure Limits Frequency Whip Model No Base Model No Table of Contents Table of Contents Quick Reference Guide General Features Features Front Panel Controls Controls and Display Microphone Push-To-Talk PTT Switch Not Shown Push Rear Panel Jacks and Connectors Display Description General Operation Power-Up SequenceDetermining Volume Level Alpha Display Mode Numeric Display ModeBacklight Operation System/Group Display Modes Selecting the System and Group Select Mode Indication With Numeric DisplaySelect Mode Indication With Alpha Tag Display Microphone Off-Hook Detect Setting Squelch Control Introduction LTR-Net, LTR, and Conventional Operation Bank Select General Features Encryption Call IndicatorEmergency Switch Home System/Group Select Function FCN Switch Horn Alert Horn Alert Enabled Option Select Power Turn-Off Delay Receive-Only Groups Proceed Clear-To-Talk Tone Tone Select Stealth ModeTime-Out Timer Transmitter Thermal Foldback Standard Group CallsGeneral Placing a Standard Group Call Conventional Operation LTR-Net and LTR Operation Placing Telephone Calls Telephone CallsReceiving a Standard Group Call Receiving a Telephone Call Landside-Originate Telephone Calls LTR-NET Auxiliary Calls Receiving Auxiliary Calls Placing LTR-Net Auxiliary Calls Menu Mode Introduction Option Switches Menu ModeOption Switches Switch Menu Mode and Option Switch Functions System and Group Scanning Using Menu Mode System and Group Scanning System and Group Scanning Scan List Programming Scan Delay and Continue Timers Transmitting In The Scan Mode Transmit Inhibit LTR-NET and LTR Features Telephone Group Select Calls on Priority ID Codes Busy Queuing LTR-NET FeaturesLTR-Net Standard and Special Calls Roaming Conventional Features LTR FeaturesStandard Group Calls Telephone Calls Monitor Mode Selected Talk-Around Transmit Disable On Busy Supervisory Tones MiscellaneousCall Guard Squelch Miscellaneous LTR Telephone Call Tones LTR-Net Special Call Tones Display Messages Miscellaneous Bright DIM OFF Menu Mode Messages Speaking Into Microphone System Operator Programming Licensing Preventing Battery DischargeOperation At Extended Range Transceiver Service Miscellaneous