EFJohnson 98x6, 98x3, 002-9803-601 manual LTR-Net Special Call Tones, LTR Telephone Call Tones

MISCELLANEOUS

Error Tone - This is a two-pitch tone that indicates that an error condi- tion has occurred.

LTR-Net Special Call Tones

The following tones are generated by the LTR-Net equipment and are heard when making a telephone, unique ID, or directed group special call on an LTR-Net system.

Confirmation Tone - This is a short tone that sounds when the num- ber just dialed has been accepted by the system.

Call Proceed Tone - With LTR-Net directed group calls (see

page 32), ringing does not occur after the number is dialed. Instead, another short tone sounds after the confirmation tone to indicate that the audio path is complete and speaking can begin.

End Call Tone - Three beeps which indicate that the end of the call has been detected by the system.

Proceed Dialing Tone - When placing a landside-to-mobile tele- phone call (see page 31), the landside caller may enter a special number which specifies the mobile being called. This tone indicates when that number should be dialed.

LTR Telephone Call Tones

The following tones are generated by LTR interconnect equip- ment and are heard when making LTR telephone calls.

Reorder Tone - Three beeps which indicate that the call has been terminated by the system.

Return Time Warning Tone - Two beeps which warn that you have not transmitted for an extended period. If you do not transmit within 5 seconds, the call is automatically terminated by the system. The time between transmissions is one of the parameters used by the system to detect the end of a call when the # character is not sent.

49