Miscellaneous | EFJohnson 98x3, 98x6, 002-9803-601 instruction

MISCELLANEOUS

power is turned on. This number indicates such things as frequency band, power output, and tier of the transceiver. The eighth digit is reserved and always “0”.

NO ACCES - Indicates that the radio system could not be accessed, perhaps because of an out-of-range condition. Refer to “Operation At Extended Range” on page 54 for more information.

NO PHONE - Indicates that there is no telephone group programmed in the current system when the Telephone option switch is pressed (see page 41).

NO POWER - Indicates that the transmitter temperature or supply voltage is excessive and that the transmitter has been automatically shut down. Release the PTT switch and allow the transmitter to cool. If the problem persists, contact your system operator for service.

NOT AUTH - Indicates that an attempt was made to register on a site where service was not authorized (see page 43).

NOT CONV - Indicates that an attempt was made to enable a conventional mode feature on an LTR-Net or LTR system.

NOT LNET - Indicates that an attempt was made to enable an LTR- Net mode feature on an LTR or conventional system.

OUT-LOCK - Indicates that the synthesizer is unlocked. Refer to “Transceiver Service” on page 55 for more information.

PROG ERR - Indicates an EEPROM read error. Refer to “Trans- ceiver Service” on page 55 for more information.

SLEEPING - Indicates that the transceiver has been temporarily disabled by the system operator. It will be automatically enabled again when operation can be resumed.

SQUELCH - Indicates that the conventional squelch adjust mode is selected (see page 18).

51

Image 51

EFJohnson 98x3, 98x6, 002-9803-601 manual Miscellaneous

Contents

LTR-Net 9800 Series Page Page Safety Information FCC Exposure Limits Frequency Whip Model No Base Model No Table of Contents Table of Contents Quick Reference Guide General Features Features Front Panel Controls Controls and Display Microphone Push-To-Talk PTT Switch Not Shown Push Rear Panel Jacks and Connectors Display Description Power-Up Sequence Determining Volume LevelGeneral Operation System/Group Display Modes Numeric Display ModeAlpha Display Mode Backlight Operation Select Mode Indication With Numeric Display Select Mode Indication With Alpha Tag DisplaySelecting the System and Group Microphone Off-Hook Detect Setting Squelch Control Introduction LTR-Net, LTR, and Conventional Operation Bank Select General Features Call Indicator Emergency SwitchEncryption Home System/Group Select Function FCN Switch Horn Alert Horn Alert Enabled Option Select Power Turn-Off Delay Receive-Only Groups Proceed Clear-To-Talk Tone Stealth Mode Time-Out TimerTone Select Placing a Standard Group Call Standard Group CallsTransmitter Thermal Foldback General Conventional Operation LTR-Net and LTR Operation Telephone Calls Receiving a Standard Group CallPlacing Telephone Calls Receiving a Telephone Call Landside-Originate Telephone Calls LTR-NET Auxiliary Calls Receiving Auxiliary Calls Placing LTR-Net Auxiliary Calls Option Switches Menu Mode Option SwitchesMenu Mode Introduction Switch Menu Mode and Option Switch Functions System and Group Scanning Using Menu Mode System and Group Scanning System and Group Scanning Scan List Programming Scan Delay and Continue Timers Transmitting In The Scan Mode Transmit Inhibit LTR-NET and LTR Features Telephone Group Select Calls on Priority ID Codes LTR-NET Features LTR-Net Standard and Special CallsBusy Queuing Roaming Telephone Calls LTR FeaturesConventional Features Standard Group Calls Monitor Mode Selected Talk-Around Transmit Disable On Busy Miscellaneous Call Guard SquelchSupervisory Tones Miscellaneous LTR Telephone Call Tones LTR-Net Special Call Tones Display Messages Miscellaneous Bright DIM OFF Menu Mode Messages Speaking Into Microphone System Operator Programming Preventing Battery Discharge Operation At Extended RangeLicensing Transceiver Service Miscellaneous