Horn Alert Enabled | EFJohnson 002-9803-601, 98x3, 98x6 specs

GENERAL FEATURES

HOME option switch if it is programmed. The Home system/group is then displayed and it becomes the selected system/group. If no home system/group or FCN or HOME option switch has been programmed, this function is not available. A different home system/ group can be programmed for each bank.

Horn Alert

NOTE: The horn alert feature is not be available with some early models.

If this feature has been installed by your system operator, it activates an external alert such as the vehicle horn or lights when a call is received on a group programmed for horn alert. When the

horn alert is enabled, is displayed as shown in the following illustration.

Horn Alert

Enabled

When enabled, the horn alert pulses on and off for 1-8 cycles and then goes back to the disabled state. To change the currently selected horn alert mode, the HRN ALRT menu parameter can be used if available (see page 33).

The horn alert is programmed to operate in the manual or auto- matic mode (see descriptions which follow). If the ignition switch does not control transceiver power, only the front panel power switch affects operation when applicable. Refer to “Power Turn-Off Delay” on page 24 for more information.

Manual Off/On Mode

The horn alert mode does not change when power is turned on and off by either the ignition switch or power switch. Therefore, the horn alert is entirely controlled by the HRN ALRT menu parameter.

23

Image 23

EFJohnson 002-9803-601, 98x3, 98x6 manual Horn Alert Enabled

Contents

LTR-Net 9800 Series Page Page Safety Information FCC Exposure Limits Frequency Whip Model No Base Model No Table of Contents Table of Contents Quick Reference Guide General Features Features Front Panel Controls Controls and Display Microphone Push-To-Talk PTT Switch Not Shown Push Rear Panel Jacks and Connectors Display Description General Operation Power-Up SequenceDetermining Volume Level System/Group Display Modes Numeric Display ModeAlpha Display Mode Backlight Operation Selecting the System and Group Select Mode Indication With Numeric DisplaySelect Mode Indication With Alpha Tag Display Microphone Off-Hook Detect Setting Squelch Control Introduction LTR-Net, LTR, and Conventional Operation Bank Select General Features Encryption Call IndicatorEmergency Switch Home System/Group Select Function FCN Switch Horn Alert Horn Alert Enabled Option Select Power Turn-Off Delay Receive-Only Groups Proceed Clear-To-Talk Tone Tone Select Stealth ModeTime-Out Timer Placing a Standard Group Call Standard Group CallsTransmitter Thermal Foldback General Conventional Operation LTR-Net and LTR Operation Placing Telephone Calls Telephone CallsReceiving a Standard Group Call Receiving a Telephone Call Landside-Originate Telephone Calls LTR-NET Auxiliary Calls Receiving Auxiliary Calls Placing LTR-Net Auxiliary Calls Menu Mode Introduction Option Switches Menu ModeOption Switches Switch Menu Mode and Option Switch Functions System and Group Scanning Using Menu Mode System and Group Scanning System and Group Scanning Scan List Programming Scan Delay and Continue Timers Transmitting In The Scan Mode Transmit Inhibit LTR-NET and LTR Features Telephone Group Select Calls on Priority ID Codes Busy Queuing LTR-NET FeaturesLTR-Net Standard and Special Calls Roaming Telephone Calls LTR FeaturesConventional Features Standard Group Calls Monitor Mode Selected Talk-Around Transmit Disable On Busy Supervisory Tones MiscellaneousCall Guard Squelch Miscellaneous LTR Telephone Call Tones LTR-Net Special Call Tones Display Messages Miscellaneous Bright DIM OFF Menu Mode Messages Speaking Into Microphone System Operator Programming Licensing Preventing Battery DischargeOperation At Extended Range Transceiver Service Miscellaneous