HP B6960-90078 manual Restarting Failed Backups, 266

Backup

Managing Failed Backups

NOTE	You can enable Wake ONLAN support for computers equipped with a
	Wake ONLAN-compatible LAN interface, such as the HP
	NightDIRECTOR series. The Wake ONLAN (WOL) option is available in
	the BIOS setup.
	When you install a Disk Agent on a Windows client and add it to a cell,
	the client’s Mac address is automatically discovered. You can also
	manually change the Mac address in the same section where you enable
	the Wake ONLAN (WOL) option, as shown below.
	Use the following steps to enable Wake ONLAN support for the Windows
	client:
	1.	In the Data Protector Manager, switch to the Clients context.
	2.	In the Scoping Pane, right-click the client whose WOL option you
		want to enable, and then click Properties.
	3.	Click the Advanced tab.
	4.	Under the Magic Packet section, select the Enable Magic Packet
		check box, and then click Apply.

Restarting Failed Backups

Data Protector provides a simple way of restarting the backup of failed objects only. This can be done as follows:

1.In the Data Protector Manager, switch to the Internal Database context.

2.Under Internal Database, expand the Sessions item.

3.In the Results Area, search for your backup.

You can sort your sessions using the buttons on the top of each of the columns.

4.Right-click the failed session, and then select Restart Session.

A dialog box appears asking you to confirm that you want to restart the session. Click Yes.

266 Chapter 5