Further Information

Example of the Package Control File

#192.10.25.0 enter:

#IP[0]=192.10.25.12

#SUBNET[0]=192.10.25.0 # (netmask=255.255.255.0)

#Hint: Run "netstat -i" to see the available subnets in the Network field.

#

#IP/Subnet address pairs for each IP address you want to add to a subnet

#interface card. Must be set in pairs, even for IP addresses on the same

#subnet.

#

IP[0]=10.17.3.230

SUBNET[0]=10.17.0.0

#SERVICE NAMES AND COMMANDS.

#Specify the service name, command, and restart parameters which are

#used by this package. Uncomment SERVICE_NAME[0]="", SERVICE_CMD[0]="",

#SERVICE_RESTART[0]="" and fill in the name of the first service, command,

#and restart parameters. You must begin with SERVICE_NAME[0], SERVICE_CMD[0],

#and SERVICE_RESTART[0] and increment the list in sequence.

#For example:

#SERVICE_NAME[0]=pkg1a

#SERVICE_CMD[0]="/usr/bin/X11/xclock -display 192.10.25.54:0"

#SERVICE_RESTART[0]="" # Will not restart the

service.

A-42

Appendix A

Page 772
Image 772
HP B6960-90078 manual # Service Names and Commands