HP B6960-90078 manual Haltscript /etc/cmcluster/ob2cl/ob2cl.cntl

Further Information

Example of the Package Configuration File

#execution of each script.

#Note: The HALT_SCRIPT_TIMEOUT should be greater than the sum of

#all SERVICE_HALT_TIMEOUT specified for all services.

RUN_SCRIPT /etc/cmcluster/ob2cl/ob2cl.cntl

RUN_SCRIPT_TIMEOUT NO_TIMEOUT

HALT_SCRIPT /etc/cmcluster/ob2cl/ob2cl.cntl

HALT_SCRIPT_TIMEOUT NO_TIMEOUT

#Enter the SERVICE_NAME, the SERVICE_FAIL_FAST_ENABLED and the

#SERVICE_HALT_TIMEOUT values for this package. Repeat these

#three lines as necessary for additional service names. All

#service names MUST correspond to the service names used by

#cmrunserv and cmhaltserv commands in the run and halt scripts.

#

#The value for SERVICE_FAIL_FAST_ENABLED can be either YES or

#NO. If set to YES, in the event of a service failure, the

#cluster software will halt the node on which the service is

#running. If SERVICE_FAIL_FAST_ENABLED is not specified, the

#default will be NO.

#

#SERVICE_HALT_TIMEOUT is represented in the number of seconds.

#This timeout is used to determine the length of time (in

#seconds) the cluster software will wait for the service to

#halt before a SIGKILL signal is sent to force the termination

#of the service. In the event of a service halt, the cluster

#software will first send a SIGTERM signal to terminate the

#service. If the service does not halt, after waiting for the

Appendix A A-31