HP B6960-90078 manual Using the Data Protector GUI

	ADIC/GRAU DAS and STK ACS Libraries
	The ADIC/GRAU DAS Library Device
	2. Open the EIF-Configurationwindow by double-clicking the
	I/O unit icon, and then click the Logical Ranges field.
	In the text box the available Insert/Eject Areas are listed.
NOTE	One Data Protector library device can handle only one media type.
	It is important to remember which media type belongs to each one of the
	specified Insert and Eject Areas, because you will need this data later for
	configuring Insert/Eject Areas for the Data Protector library.
	Run the following system command to check whether or not the library
	drives are properly connected to your system:
	lsdev -C
	You should see your device listed.
Remote	The installation procedure consists of these steps:
Installation	1. Distribute the DAS Agent component to clients using the Data
	Protector graphical user interface and Installation Server.
	2. Physically connect the library drives and robotics to the systems
	where you have installed the DAS Agent software.
	See http://www.openview.hp.com/products/datapro/spec_0001.html for
	details about supported ADIC/GRAU libraries.
	At this stage, you should have your hardware connected and your DAS
	software properly installed.
	For the AIX platform, install the ADIC/GRAU library for client interface:
	Copy libaci.o shared library into the <Data_Protector_home>/lib
	directory.
	Using the Data Protector GUI
	Configure the ADIC/GRAU library the DAS client of which will access
	ADIC/GRAU robotics during specific Media Management operations
	(Query, Enter, Eject). The steps are as follows:
	• In the HP OpenView Storage Data Protector Manager switch to
	the Devices & Media context. In the Scoping Pane, right-click
	Devices and then click Add Device.

Chapter 14 669