HP B6960-90078 manual Dbservice

Further Information

Example of the Package Configuration File

#specified SERVICE_HALT_TIMEOUT, the cluster software will send

#out the SIGKILL signal to the service to force its termination.

#This timeout value should be large enough to allow all cleanup

#processes associated with the service to complete. If the

#SERVICE_HALT_TIMEOUT is not specified, a zero timeout will be

#assumed, meaning the cluster software will not wait at all

#before sending the SIGKILL signal to halt the service.

#
# Example: SERVICE_NAME		DB_SERVICE
#	SERVICE_FAIL_FAST_ENABLED	NO
#	SERVICE_HALT_TIMEOUT	300
#

#To configure a service, uncomment the following lines and

#fill in the values for all of the keywords.

#
#SERVICE_NAME	<service name>
#SERVICE_FAIL_FAST_ENABLED	<YES/NO>
#SERVICE_HALT_TIMEOUT	<number of seconds>
SERVICE_NAME	omni_sv
SERVICE_FAIL_FAST_ENABLED	NO
SERVICE_HALT_TIMEOUT	300

#Enter the network subnet name that is to be monitored for this package.

#Repeat this line as necessary for additional subnet names. If any of

A-32 Appendix A