HP B6960-90078 manual

ADIC/GRAU DAS and STK ACS Libraries

The STK ACS Library Device

If a CAP is not in manual operating mode, change the mode using the following command:

set cap manual <cap_id>

✓A list of SCSI addresses for the drives, for example, scsi4:0:1:0.

For more information on SCSI addresses, see HP OpenView Storage Data Protector Installation and Licensing Guide.

Remote The installation procedure consists of the steps:

Installation

1.Distribute the ACS Agent component to clients using the Data Protector graphical user interface and Installation Server for Windows.

2.Physically connect the library drives and the systems where you have installed ACS Agent.

See http://www.hp.com/go/dataprotector/specification for details about supported StorageTek devices.

3.To start the ACS ssi daemon

•On the Windows ACS client and the Cell Manager, install the LibAttach service. Make sure that during configuration of LibAttach service the appropriate ACSLS hostname is entered. After the successful configuration the LibAttach services are started automatically and will be started automatically after the boot as well.

NOTE	After you have attached the LibAttach service, check if the
	libattach\bin directory has been added to the system path
	automatically. If not, add it manually.

•For more information on the service see the documentation that comes with the StorageTek library.

4.Run the following command to check whether or not the library drives are properly connected to your system:

•On Windows ACS client,

<Data_Protector_home>\bin\devbra -dev

Chapter 14 683