HP B6960-90078 manual

		Monitoring, Reporting, Notifications, and the Event Log
		Report Send Methods
NOTE	On a UNIX Cell Manager, SNMP traps are sent to the systems
	configured in the notification.
	On a Windows Cell Manager, SNMP traps are sent to the systems
	configured in the Windows SNMP traps configuration.
Windows NT	To configure Windows NT SNMP traps, proceed as follows:
	1.	On the Cell Manager, click Control Panel, Network, and then
		Services. If there is no SNMP Service entry in the list of network
		services under the Services tab, perform step 2. If there is, skip step
		2.
	2.	Click Add and select SNMP Service. Click OK. Insert the Windows
		NT installation CD, or provide an alternative path to the requested
		files. Click Continue.
	3.	Select SNMP Service and click Properties. Select the Traps tab
		and enter public in the Community Name drop-down list. Click Add
		next to the Community Name drop-down list.
	4.	Click Add under Trap Destinations text box and enter the
		hostname of the VPO Management Server. Click Add. Repeat this
		step to add any number of VPO Management Servers.
	5.	Click OK. Click Close.
	6.	Start omnisnmp.
Windows	To configure Windows 2000/XP/Server 2003 SNMP traps, proceed as
2000/XP/Server	follows:
2003	1.	On the Cell Manager, click Settings, and then Network and
		Dial-up Connections.
	2.	In the Advanced menu, select Optional Networking Components
		to start the wizard.
	3.	In the wizard, select Management and Monitoring tools and click
		Next.
	4.	Follow the wizard to install the Management and Monitoring tools.
	5.	Open Control Panel, Administrative Tools and then
		Services.

Chapter 7 333