HP B6960-90078 manual Split mirror backup HP StorageWorks, Disk Array XP specific term, SRD file

Glossary

split mirror backup (HP StorageWorks

Disk Array XP specific term)

See ZDB tape backup, ZDB disk/tape backup and ZDB disk backup.

split mirror restore (HP StorageWorks Disk Array XP specific term)

A process where data backed up using the ZDB tape backup or ZDB disk/tape backup process is restored from tape media to the replica storage version selected by the replica rotation process or by the user. The replica storage version is then synchronized to the original storage. Split mirror restore is limited to filesystem restore.

See also ZDB tape backup, ZDB disk/ tape backup, and replica storage rotation.

sqlhosts file (Informix specific term) An Informix connectivity-information file that contains the names of each of the database servers and any aliases to which the clients on a host computer can connect.

SRD file

The Data Protector System Recovery Data (SRD) file contains system information required for installing and configuring the operating system in case of a disaster. The SRD file is an ASCII file, generated when a CONFIGURATION backup is performed on a Windows client and stored on the Cell Manager.

SRDF (EMC Symmetrix specific term) The EMC Symmetrix Remote Data Facility is a business continuation process that enables effective, real-time data replication of SLDs between dislocated processing environments. These environments could be situated within the same root computer environment or separated by long distances.

SSE Agent (HP StorageWorks Disk Array XP specific term)

A Data Protector software module that executes all tasks required for a split mirror backup integration. It communicates with the HP StorageWorks Disk Array XP storing system using the RAID Manager XP utility (HP-UX and Windows systems) or RAID Manager Library (Solaris systems).

sst.conf file

The file /usr/kernel/drv/sst.conf is required on each Data Protector Sun Solaris client to which a multi-drive library device is connected. It must contain an entry for the SCSI address of the robotic mechanism of each library device connected to the client.

st.conf file

The file /kernel/drv/st.conf is required on each Data Protector Solaris client with a backup device connected. It must contain device information and a SCSI

G-38