HP B6960-90078 manual Configuring the Cell Manager Package, Protector Package

Integrations with Other Applications

MC/ServiceGuard Integration

/opt/omni/sbin/install/omniforsg.ksh -secondary /omni_shared

5.Unmount the mount point directory (Data Protector shared directory):

umount /omni_shared

6.Deactivate the volume group you imported: vgchange -a n /dev/vg_ob2cm

Configuring the Cell Manager Package

NOTE	The following section provides step-by-step examples to configure the
	Data Protector package. Directory and file names, numbers, and other
	variables will differ from the following examples according to your
	environment. The cluster configuration file name cluster.conf and the
	Data Protector package name ob2cl is used also as an example. You
	should follow the names given to you by your network or domain
	administrator.
	Note that the Data Protector daemons are not running anymore on
	either cluster node.
Prerequisites	• The Data Protector Cell Manager should be installed and configured
	on both cluster nodes as explained in the previous section.
	• Before configuring the Data Protector cluster package, you should
	have a cluster configuration file created and edited.

Configuring Data On the Primary Cell Manager node proceed as follows:

Protector Package

1.Check the cluster configuration file for errors: cmcheckconf -C /etc/cmcluster/cluster.conf

If there are errors, fix them.

If there are no errors, enable the configuration: cmapplyconf -C /etc/cmcluster/cluster.conf

2.Start the cluster: cmruncl

Chapter 13 633