HP B6960-90078 manual List of Data Protector Backup Options, Backup Specification Options, 236

Backup

Using Backup Options

Changing the owner works only for saved backup specifications. If the backup configuration is changed and not saved, the backup is treated as an interactive backup and the owner is not changed. This could result in a different kind of backup than expected. For example, if you interactively start an incremental backup and you are not the owner of the full backup, you will get another full backup instead of an incremental one.

List of Data Protector Backup Options

This section describes three sets of backup options. The options are ordered alphabetically within each set.

Backup Specification Options

Setting Options for

aBackup Specification

1.Select the backup specification whose options you want to set.

2.Click the Options tab.

3.Under Backup Specification Options, click Advanced. The Backup Options window appears.

4.Select the options for General, Other, and Clustering. The EMC and the StorageWorks tabs appear only if you have the respective devices connected and configured.

Ignore Clustering if you do not have the MC/Service Guard or the Microsoft Cluster Server installed and configured.

5.Click OK to confirm and exit the Backup Options window. Refer to online Help for details.

236 Chapter 5