HP B6960-90078 manual Using, Omnisrdupdate, 446

Disaster Recovery

Preparing for a Disaster Recovery

corresponding media must be added to the SRD. The SRD can be updated only on a Windows client. The name of the updated SRD file is recovery.srd.

How to Update There are three different methods possible for updating the SRD file:

SRD?

•Update SRD File Wizard

•omnisrdupdate command as a standalone utility

•omnisrdupdate command as a backup session post-exec script

Using SRD Update To update the SRD file using the Update SRD File Wizard:, proceed as

Wizardfollows:

1.In the Data Protector Manager switch to the Restore context and then click the Tasks Navigation tab.

2.In the Scoping Pane of the Tasks Navigation tab, check the

Disaster Recovery.

3.In the Results Area, check the SRD File Update option button, select the client and click Next.

4.For each of the critical objects, select an object version and click Next.

5.Type the destination directory where the updated SRD file is to be placed and click Finish.

IMPORTANT	Because the SRD file is saved on the Cell Manager system, it is not
	accessible if the Cell Manager fails. As a result, you need an additional
	copy of the Cell Manager’s SRD which should be stored in a vault.
	In addition to the Cell Manager, you should save the updated SRD file to
	several secure locations as a part of the disaster recovery preparation
	policy. See “Preparation” on page 451.
Using	It is also possible to update the SRD file using the omnisrdupdate
omnisrdupdate	command as a standalone command. The omnisrdupdate command is
	located in the <Data_Protector_home>\bin directory.

446 Chapter 10