HP B6960-90078 Running Reports and Report Groups Using the Data Protector GUI, Chapter, Running Report Groups, Running Individual Reports

Monitoring, Reporting, Notifications, and the Event Log

Running Reports and Report Groups Using the Data Protector GUIRunning Reports and Report Groups Using the Data Protector GUI

Data Protector reports can be run individually, or they can be grouped into report groups and then run.

Running Individual Reports

To run each report individually, do the following:

1.In the Data Protector Manager, switch to the Reporting context.

2.Click the Tasks tab below the Scoping Pane to switch to the tasks context. Browse the provided reports and select the one that you want.

3.Follow the Report Wizard to configure and run the report.

Running Report Groups

To run a configured report group, do the following:

1.In the Data Protector Manager, switch to the Reporting context.

2.In the Scoping Pane, browse for and right-click the report group you want to run and then click Start.

3.Click Yes to confirm.

338 Chapter 7