HP B6960-90078 manual Testing, Configuration

Configuring and Using Backup Devices

Drive Cleaning

Where <file_name> is the name of the file you will use to simulate a dirty drive, and <drive_name> is the name of the drive you want to test.

You can add multiple entries for various drives. Do not add any directories in front of the name of the file.

Testing the In order to test your configuration, do the following:

Configuration

1.In the Data Protector tmp directory, create an empty file that will be used to simulate a dirty drive. Use the same name as in the simtab or

.simtab file.

2.Start a backup using the drive you are testing.

Data Protector behaves as though the selected drive were dirty and performs the cleaning action.

To stop simulating dirty drive behavior for the specific drive, delete the file used for simulation.

64 Chapter 2