HP B6960-90078 manual Novell NetWare Cluster Integration, Clients on Novell NetWare Cluster, 642

Integrations with Other Applications

Novell NetWare Cluster Integration

	Novell NetWare Cluster Integration
	Clients on Novell NetWare Cluster
	Data Protector can only be used to back up local disks or cluster shared
	pools in a Novell NetWare Cluster environment.
	Cluster aware operation is not supported for Data Protector with Novell
	NetWare Clusters. In case of failover, backup or restore sessions have to
	be restarted manually.
Installation	Data Protector has to be installed locally on each client, and each client
	has to be imported to the cell. See the HP OpenView Storage Data
	Protector Installation and Licensing Guide for step-by-step instructions.
	To configure Novell NetWare Cluster with Data Protector, you need the
	Data Protector user interface.
	Refer to the following for more information:
	• Novell NetWare Cluster documentation.
	• HP OpenView Storage Data Protector Installation and Licensing
	Guide for more information on how to install Data Protector.
	• HP OpenView Storage Data Protector Software Release Notes for last
	minute information on the current Data Protector release.
	Configuration
	To be able to back up local disks on cluster nodes, the individual nodes
	have to be imported into the Data Protector cell. To be able to back up
	cluster shared pools, virtual server has to be imported into the cell as
	well.
	Backing Up Local Disks
	Disks local to the systems in the cluster are visible when you browse a
	system where a disk is locally connected.
	To back up local disks:
	1. Install the Data Protector Disk Agent on each system with the local
	disk you want to back up.

642 Chapter 13